修复你的物品 社区 商店

Tablet Chuwe 10.1 Touch Screen Replacement

简介

It's common to break the touch screen of your device, we are going to learn to dismount and get to the Flex cable to find out the reference number so we can order a new touch screen to substitute the broken one

你所需要的

  1. Tablet Chuwe 10.1 Touch Screen Replacement, Touch Screen: 步骤 1 中的图像 1，2 Tablet Chuwe 10.1 Touch Screen Replacement, Touch Screen: 步骤 1 中的图像 2，2

    • We must use a plastic guitar pick or in the case that you do not have one, a plastic card can do us helpful (credit card)

    翻译

  2. Tablet Chuwe 10.1 Touch Screen Replacement: 步骤 2 中的图像 1，3 Tablet Chuwe 10.1 Touch Screen Replacement: 步骤 2 中的图像 2，3 Tablet Chuwe 10.1 Touch Screen Replacement: 步骤 2 中的图像 3，3

    • Slowly, insert the pick pressing it and swinging it along the perimeter of the tablet's body

    翻译

  3. Tablet Chuwe 10.1 Touch Screen Replacement: 步骤 3 中的图像 1，1

    • Carefully loosen with your fingers the back and place the tablet face down on a flat and clean surface tablet

    翻译

  4. Tablet Chuwe 10.1 Touch Screen Replacement: 步骤 4 中的图像 1，1

    • the speaker is screwed next to the touch chassis, we must release the screw and place it in a visible place, the speaker will remain with adhesive tape next to the battery

    翻译

  6. Tablet Chuwe 10.1 Touch Screen Replacement: 步骤 5 中的图像 1，1

    • With the help of the pua or the fingers, we must release the data FLEX from the connection, making a small upward pressure

    翻译

  7. Tablet Chuwe 10.1 Touch Screen Replacement: 步骤 6 中的图像 1，1

    • Careful! The FLEX cable that joins the front and rear camera, will be completely loose, we must place it in a clean place for later assembly.

    翻译

  8. Tablet Chuwe 10.1 Touch Screen Replacement: 步骤 7 中的图像 1，1

    • we will have a third FLEX on the motherboard, we must do the same method to press up on the connector until it is released, carefully these FLEX are easy to break.

    翻译

  9. Tablet Chuwe 10.1 Touch Screen Replacement: 步骤 8 中的图像 1，2 Tablet Chuwe 10.1 Touch Screen Replacement: 步骤 8 中的图像 2，2

    • now with the help of a Phillips screwdriver, we must release the three screws that hold the base plate of the touch screen chassis, and the sensor with positive and negative cables, we can help with the fingers in a smooth way.

    翻译

  10. Tablet Chuwe 10.1 Touch Screen Replacement: 步骤 9 中的图像 1，2 Tablet Chuwe 10.1 Touch Screen Replacement: 步骤 9 中的图像 2，2

    • carefully, we already have the loose base plate of the touch chassis, we look at the various grips that connect the touch screen with the LCD and with the tine and small balancing we are doing pressure to separate touch and LCD screen.

    翻译

  11. Tablet Chuwe 10.1 Touch Screen Replacement: 步骤 10 中的图像 1，3 Tablet Chuwe 10.1 Touch Screen Replacement: 步骤 10 中的图像 2，3 Tablet Chuwe 10.1 Touch Screen Replacement: 步骤 10 中的图像 3，3

    • Following these steps we have loosen our LCD screen and the carcass of the touch screen, now we must look for the reference number that appears on the FLEX cable of the touch screen so we can order a new one

    翻译
结论

In order to reassemble your device, follow these instructions in reverse order

15等其他人完成本指南。

由衷感谢以下译者：

es en

100%

irlanda

carlos

George Youssef

Luis B

+1

和1其他...

这些译者帮助我们修补全世界！ 您也想加入吗？
开始翻译 ›

作者

与2其他贡献者

Fran Ruiz

于11/14/15注册

515 声望

撰写一个指南

徽章: 9

+ 6更多徽章

2条评论

No mention of the adhesive needed to reattach the screen.

Jan - 回复

garcias por la ayuda

jorge alejandro - 回复

添加评论

浏览统计数据:

过去 24 小时： 4

过去 7 天： 14

过去 30 天： 79

总计 3,761