修复你的物品 社区 商店

TRS-80 Color Computer Power Cord Replacement

简介

Replace an aging power cord on the TRS-80 Color Computer.

你所需要的

  1. TRS-80 Color Computer Power Cord Replacement, Outside Casing: 步骤 1 中的图像 1，1

    • Flip the computer over.

    • Remove the two 24.1mm Phillips screws near the front of the case.

    • Remove the five 33.0 mm Phillips screws towards the back of the case.

    编辑

  2. TRS-80 Color Computer Power Cord Replacement: 步骤 2 中的图像 1，2 TRS-80 Color Computer Power Cord Replacement: 步骤 2 中的图像 2，2

    • Carefully flip the computer right side up.

    • Lift off the top half of the case.

    编辑

  3. TRS-80 Color Computer Power Cord Replacement, Keyboard: 步骤 3 中的图像 1，2 TRS-80 Color Computer Power Cord Replacement, Keyboard: 步骤 3 中的图像 2，2

    • Near the motherboard, gently pull the keyboard ribbon cable until it becomes free.

    • Lift the keyboard out of the case.

    编辑

  5. TRS-80 Color Computer Power Cord Replacement, Motherboard: 步骤 4 中的图像 1，3 TRS-80 Color Computer Power Cord Replacement, Motherboard: 步骤 4 中的图像 2，3 TRS-80 Color Computer Power Cord Replacement, Motherboard: 步骤 4 中的图像 3，3

    • Remove the nine 15.24 mm Phillips screws securing the motherboard in place.

    • When removing the spring door, make sure to keep the door closed.

    编辑

  6. TRS-80 Color Computer Power Cord Replacement: 步骤 5 中的图像 1，3 TRS-80 Color Computer Power Cord Replacement: 步骤 5 中的图像 2，3 TRS-80 Color Computer Power Cord Replacement: 步骤 5 中的图像 3，3

    • Remove the 5 jumper cables from the motherboard.

    • Once the jumper cables lift the motherboard up gently; it should lift out easily.

    编辑

  7. TRS-80 Color Computer Power Cord Replacement, Power Cord: 步骤 6 中的图像 1，2 TRS-80 Color Computer Power Cord Replacement, Power Cord: 步骤 6 中的图像 2，2

    • Remove the two 1.6 inch screws securing the transformer.

    编辑

  8. TRS-80 Color Computer Power Cord Replacement: 步骤 7 中的图像 1，1

    • Remove the power cord's three leads from the transformer.

    • Note the orientation and color of the three leads. Make sure to replace these exactely as they were.

    编辑

  9. TRS-80 Color Computer Power Cord Replacement: 步骤 8 中的图像 1，2 TRS-80 Color Computer Power Cord Replacement: 步骤 8 中的图像 2，2

    • Using needle-nose pliers, pinch the tabs of the grommet holding the power cord to the case and push the grommet out.

    • Remove the entire length of cord from the case and replace with a new one.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

作者

与5其他贡献者

Christopher Paige

于01/21/11注册

549 声望

创作了3篇指南

徽章: 11

+ 8更多徽章

团队

Cal Poly, Team 11-24, Maness Winter 2011 Cal Poly, Team 11-24, Maness Winter 2011 的会员

CPSU-MANESS-W11S11G24

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 4

总计 2,282