跳转到主内容

TDK Life on Record A26 Battery Replacement

你所需要的

  1. TDK Life on Record A26 Battery Replacement, Battery: 步骤 1 中的图像 1,1
    • Get a replacement battery from the TDK company. The battery part number is E23-00059-01.

  2. TDK Life on Record A26 Battery Replacement: 步骤 2 中的图像 1,2 TDK Life on Record A26 Battery Replacement: 步骤 2 中的图像 2,2
    • Obtain the screwdriver and the T09 (Torx) bit from the iFixit toolkit and assemble them together.

  3. TDK Life on Record A26 Battery Replacement: 步骤 3 中的图像 1,2 TDK Life on Record A26 Battery Replacement: 步骤 3 中的图像 2,2
    • Use the T09-bit screwdriver to remove the two 8-mm torx screws on the bottom strip of the speaker.

  4. TDK Life on Record A26 Battery Replacement: 步骤 4 中的图像 1,3 TDK Life on Record A26 Battery Replacement: 步骤 4 中的图像 2,3 TDK Life on Record A26 Battery Replacement: 步骤 4 中的图像 3,3
    • Remove the faceplate by using the pointy side of the black plastic spudger.

    • Stick the point of the spudger into one of the corners surrounding the faceplate and gently pull it up.

  5. TDK Life on Record A26 Battery Replacement: 步骤 5 中的图像 1,1
    • Then exchange the T09 bit for a PH1 bit

  6. TDK Life on Record A26 Battery Replacement: 步骤 6 中的图像 1,2 TDK Life on Record A26 Battery Replacement: 步骤 6 中的图像 2,2
    • Use the PH1-bit screwdriver to remove the eight 11-mm Phillips head screws that are located behind the faceplate.

  7. TDK Life on Record A26 Battery Replacement: 步骤 7 中的图像 1,2 TDK Life on Record A26 Battery Replacement: 步骤 7 中的图像 2,2
    • Remove the one 7-mm Phillips head screw located on the lower left of the front of the speaker with the PH1-bit screwdriver.

  8. TDK Life on Record A26 Battery Replacement: 步骤 8 中的图像 1,2 TDK Life on Record A26 Battery Replacement: 步骤 8 中的图像 2,2
    • After all screws are removed, turn the speaker over to the back of the speaker.

  9. TDK Life on Record A26 Battery Replacement: 步骤 9 中的图像 1,3 TDK Life on Record A26 Battery Replacement: 步骤 9 中的图像 2,3 TDK Life on Record A26 Battery Replacement: 步骤 9 中的图像 3,3
    • Use the blue plastic opening tool from the toolkit to pry off the back of the speaker, gradually moving around the device.

    • Make sure to open it evenly on all sides.

  10. TDK Life on Record A26 Battery Replacement: 步骤 10 中的图像 1,2 TDK Life on Record A26 Battery Replacement: 步骤 10 中的图像 2,2
    • Then remove the bottom narrow strip of plastic to uncover the battery.

  11. TDK Life on Record A26 Battery Replacement: 步骤 11 中的图像 1,2 TDK Life on Record A26 Battery Replacement: 步骤 11 中的图像 2,2
    • Follow the red, black, and white wires attached to the green battery sleeve down to the white small plug.

  12. TDK Life on Record A26 Battery Replacement: 步骤 12 中的图像 1,2 TDK Life on Record A26 Battery Replacement: 步骤 12 中的图像 2,2
    • Once you have found the white plug, gently grip the colored wires and carefully pull to remove the white plug from the speaker.

结论

To reassemble your device, follow these instructions in reverse order.

9等其他人完成本指南。

Elise Howard

于10/13/15注册

831 声望

创作了3篇指南

团队

2条评论

This procedure is totally unnecessary! TDK has much simpler instructions. http://downloads.imationsupport.com/lor/...

Marty F - 回复

Actually, this page DID help me as the other “simpler” instrucions didn’t work, as I was unable to slide the battery cover after removing the two screws.In any case the entire procedure only took about ten minutes, so THANK YOU!

Sander - 回复

添加评论

浏览统计数据:

过去 24 小时: 2

过去 7 天: 13

过去 30 天: 35

总计 6,970