简介

This guide is useful if the SD card in the device is not working or properly installed.

工具

无需工具。

配件

无需配件。

To remove the battery cover, first turn the phone so that the keypad is face down. While holding the phone with one hand, place the thumb of the other hand at the top of the battery cover. Slide the battery cover toward the bottom of the phone to remove.
  • To remove the battery cover, first turn the phone so that the keypad is face down.

  • While holding the phone with one hand, place the thumb of the other hand at the top of the battery cover.

  • Slide the battery cover toward the bottom of the phone to remove.

添加评论

To remove the battery, first grab it using a finger on either side. Pull the battery upward, while securing the phone with your other hand.
  • To remove the battery, first grab it using a finger on either side.

  • Pull the battery upward, while securing the phone with your other hand.

  • Gently remove the battery and place it to the side of the phone.

添加评论

Locate the slot for the SD card on the back of the phone. Insert the SD card so that the copper connectors on the card line up with the connectors on the phone (no card pictured).
  • Locate the slot for the SD card on the back of the phone. Insert the SD card so that the copper connectors on the card line up with the connectors on the phone (no card pictured).

添加评论

Secure the SD card in place by sliding the silver tab over it (SD card not pictured).
  • Secure the SD card in place by sliding the silver tab over it (SD card not pictured).

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Colin Horgan

于2012年10月22日注册

32 信誉积分

创作了2篇指南

团队

Clemson, Team 15-4, Benson Fall 2012 Clemson, Team 15-4, Benson Fall 2012 的会员

CLEM-BENSON-F12S15G4

4 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 203