跳转到主内容

简介

This guide will show you how to remove and replace the outer shell of your SwagTron T1

配件

没有特定配件。

  1. SwagTron T1 Outer Shell Replacement, Back Panels: 步骤 1 中的图像 1,1
    • Ensure that the SwagTron is off.

    • Turn the SwagTron upside down to see the underside.

  2. SwagTron T1 Outer Shell Replacement: 步骤 2 中的图像 1,3 SwagTron T1 Outer Shell Replacement: 步骤 2 中的图像 2,3 SwagTron T1 Outer Shell Replacement: 步骤 2 中的图像 3,3
    • Unscrew the eighteen 10mm screws that secure the back panels using a Phillips #2 screwdriver.

    • The screws are tightly in place. It will take effort to screw them out.

    • The panel is still attached to the SwagTron by wires that go to the motherboard.

    • Carefully lift the panels off

  3. SwagTron T1 Outer Shell Replacement: 步骤 3 中的图像 1,3 SwagTron T1 Outer Shell Replacement: 步骤 3 中的图像 2,3 SwagTron T1 Outer Shell Replacement: 步骤 3 中的图像 3,3
    • Follow the wires from the panels to the motherboard.

    • You may need to cut any zip ties that are holding the wires together.

    • There is one connection on the battery side and three on the other side that must be removed.

    • These connections may be difficult to remove. Try to securely press the connection and pull firmly.

    • Your back panels are now completely removed.

  4. SwagTron T1 Outer Shell Replacement, Outer Shell: 步骤 4 中的图像 1,2 SwagTron T1 Outer Shell Replacement, Outer Shell: 步骤 4 中的图像 2,2
    • Unscrew the twelve 10mm screws that connect the metal chassis to the top plastic panel.

    • These screws will be low into the SwagTron.

  5. SwagTron T1 Outer Shell Replacement: 步骤 5 中的图像 1,1
    • Turn the SwagTron right side up and slightly lift up the panel.

    • Be careful to not pull too hard because the panel is still attached to the SwagTron by wires.

  6. SwagTron T1 Outer Shell Replacement: 步骤 6 中的图像 1,3 SwagTron T1 Outer Shell Replacement: 步骤 6 中的图像 2,3 SwagTron T1 Outer Shell Replacement: 步骤 6 中的图像 3,3
    • Turn the SwagTron over and disconnect the wires from the motherboard.

    • Follow the wires to the underside of the SwagTron.

    • Carefully remove the cord and the panel together.

    • All the panels are now free from the SwagTron.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Gloria Whang

于2017年04月13日注册

173 声望

撰写一个指南

团队

Cal Poly, Team S17-G5, Banghart Spring 2017 Cal Poly, Team S17-G5, Banghart Spring 2017 的会员

CPSU-BANGHART-S17S17G5

4 名成员

创作了5篇指南

4条评论

Where did you ind a replacement shell for the Swagtron T1? I need to buy a new one, but can’t seem to find a place to buy it online.

Syd Jensen - 回复

Where can I buy a Swagtron T1 replacement shell?

Syd Jensen - 回复

Syd any luck finding a replacement shell?  I need to order the same kind and cannot find it online.

Craig -

Amazon.com Keyword: CertiCable

Jesse Griffis -

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 4

过去 30 天: 7

总计 1,815