简介

Use this guide to remove the exhaust pipe from your Suzuki FA50 moped.

  1. Use a #2 Phillips screwdriver to remove the heat shield from the muffler.
    • Use a #2 Phillips screwdriver to remove the heat shield from the muffler.

  2. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  3. There are two 10 mm hex nuts attaching the muffler to the engine. Make sure you remove both of them before proceeding to the next step.
    • There are two 10 mm hex nuts attaching the muffler to the engine. Make sure you remove both of them before proceeding to the next step.

    • Use a 10 mm socket wrench to unscrew the two hex nuts.

  4. Use a 12 mm socket wrench to unscrew the third and final hex nut that holds the muffler in place.
    • Use a 12 mm socket wrench to unscrew the third and final hex nut that holds the muffler in place.

    • Make sure to support the muffler with your hand while removing this nut, otherwise it may just fall to the floor.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

浏览统计数据:

过去的24小时: 1

过去的7天: 5

过去的30天: 19

总计 6,042