修复你的物品 社区 商店

Sungale CyberUs Speaker Replacement

简介

In case of speaker malfunction,here is all steps needed to replace this part in your Sungale CyberUs.

你所需要的

  1. Sungale CyberUs Speaker Replacement, Screen: 步骤 1 中的图像 1，1

    • Make sure to have the device turned off to prevent any minor electric shock.

    • Hold the device so the left side is facing towards you (like in the picture shown) so the two 4mm PH001 screws are exposed and easier to access.

    编辑

  2. Sungale CyberUs Speaker Replacement: 步骤 2 中的图像 1，1

    • Remove both 4mm PH001 screws from the side panel.

    编辑

  3. Sungale CyberUs Speaker Replacement: 步骤 3 中的图像 1，2 Sungale CyberUs Speaker Replacement: 步骤 3 中的图像 2，2

    • Carefully pry up one of the top corners of the screen with a plastic spudger (prying tool). Slide the tool along the edges to release it from the housing.

    • The screen may make some cracking noises as you pry it from the casing. This is expected.

    • The screen is still connected to the motherboard. Use force with caution.

    编辑

  4. Sungale CyberUs Speaker Replacement: 步骤 4 中的图像 1，1

    • Gently turn screen over, to the side, to reveal the ZIF connector attached to the motherboard.

    编辑

  5. Sungale CyberUs Speaker Replacement: 步骤 5 中的图像 1，1

    • Gently using tweezers, flip the black clip up. Pull the ZIF connector out.

    • You screen is still not completely detached from the device.

    编辑

  7. Sungale CyberUs Speaker Replacement: 步骤 6 中的图像 1，2 Sungale CyberUs Speaker Replacement: 步骤 6 中的图像 2，2

    • Using the prying tool, slide the black clip out. Pull the ZIF connector out and to the left, the screen is now detached from the motherboard.

    编辑

  8. Sungale CyberUs Speaker Replacement, Battery: 步骤 7 中的图像 1，1

    • Now, carefully we will remove the battery. Find the leads, or the red and black wires going to the battery from the motherboard. To free the wires you must cut the wire near the battery leads. Make sure both ends are clean and have enough exposed wire.

    编辑

  9. Sungale CyberUs Speaker Replacement: 步骤 8 中的图像 1，1

    • You will have to clean the connections and solder the new battery back into place. Just as before, you want to reconnect the new battery to the motherboard.

    编辑

  10. Sungale CyberUs Speaker Replacement, Mother Board: 步骤 9 中的图像 1，1

    • In case of a burned out mother board, take the cables from the battery and the speaker (black and red cables) and detach them from the motherboard (you could only cut them and weld them when replacing with new motherboard).

    • Gently tug on wires to remove the connection from the logic board.

    编辑

  11. Sungale CyberUs Speaker Replacement: 步骤 10 中的图像 1，1

    • To remove mother board gently pull away from the top of the device to make sure the earphone jack it our of the slot.

    编辑

  12. Sungale CyberUs Speaker Replacement: 步骤 11 中的图像 1，1

    • Your mother board is now completely removed from the device.

    编辑

  13. Sungale CyberUs Speaker Replacement, Speaker: 步骤 12 中的图像 1，1

    • Disconnect cables from the mother board with tweezers.

    编辑

  14. Sungale CyberUs Speaker Replacement: 步骤 13 中的图像 1，1

    • Use plastic spudger (prying tool) to remove speaker from casing mold. The speaker is now completely detached from device shell.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Javier Tandazo

于10/03/16注册

243 声望

创作了2篇指南

徽章: 5

+ 2更多徽章

团队

IUPUI, Team 1-4, Harley Fall 2016 IUPUI, Team 1-4, Harley Fall 2016 的会员

IUPUI-HARLEY-F16S1G4

3 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 1

总计 101