Summer 3D Lite Convenience Stroller Seat Replacement - iFixit 维修指南

简介

If the seat gets dirty, or the fabric is damaged, this guide will show you how to take the seat out.

你所需要的

步骤 1 Seat

Summer 3D Lite Convenience Stroller Seat Replacement, Seat: 步骤 1 中的图像 1，2

Summer 3D Lite Convenience Stroller Seat Replacement, Seat: 步骤 1 中的图像 2，2

Remove the two silver 12.7 mm #01 screws (1 on each side) holding the back of the seat to the frame.

步骤 2

Summer 3D Lite Convenience Stroller Seat Replacement: 步骤 2 中的图像 1，1

Unscrew the four silver 12.7 mm #01 screws (2 on each side) holding the fabric along the handlebars on both sides.

步骤 3

Summer 3D Lite Convenience Stroller Seat Replacement: 步骤 3 中的图像 1，1

Unscrew the four silver 12.7 mm #01 (2 on each side) screws on the bottom of the frame where the fabric is held in place.

步骤 4

Summer 3D Lite Convenience Stroller Seat Replacement: 步骤 4 中的图像 1，2

Summer 3D Lite Convenience Stroller Seat Replacement: 步骤 4 中的图像 2，2

After checking that all screws are unattached, pull the seat off.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Pradeep Sangli

于09/29/15注册

116 声望

撰写一个指南

团队

Cal Poly, Team 11-5, Forte Fall 2015 Cal Poly, Team 11-5, Forte Fall 2015 的会员

CPSU-FORTE-F15S11G5

4 名成员

创作了3篇指南

0条评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 16

过去 30 天： 38

总计 2,261