Stray Kids Version 1 Official Light Stick Corroded Battery Terminals Repair

简介

Battery acid damage is a common issue that can occur in electronic devices like K-pop light sticks. Left unaddressed, it can degrade performance and render the light stick inoperable. This guide will identify and repair battery acid damage on a Stray Kids V.1 light stick and how to prevent further damage and ensure device longevity.

你所需要的

步骤 1 Stray Kids Version 1 Official Light Stick Corroded Battery Terminals Repair

Stray Kids Version 1 Official Light Stick Corroded Battery Terminals Repair, Stray Kids Version 1 Official Light Stick Corroded Battery Terminals Repair: 步骤 1 中的图像 1，3

Safety first: Wear gloves and safety glasses (optional but recommended) to protect your skin and eyes.
Unscrew the battery chamber and remove the batteries.

翻译

步骤 2

Inspect the battery chamber for signs of corrosion. Pay attention to areas around the battery socket and terminals. As shown in the picture, these red arrows are the areas we will focus on.

翻译

步骤 3

Stray Kids Version 1 Official Light Stick Corroded Battery Terminals Repair: 步骤 3 中的图像 3，3

To make diluted vinegar in a measuring cup mix equal parts water and vinegar. I used ½ cup water and ½ cup vinegar.
Vinegar is slightly acidic, which makes it helpful in neutralizing and removing alkaline battery acid residue.

翻译

步骤 4

Stray Kids Version 1 Official Light Stick Corroded Battery Terminals Repair: 步骤 4 中的图像 3，3

Dip a cotton swab or soft cloth into the vinegar solution and gently wipe the corroded areas on the light stick.
Let the solution sit for 5-15 minutes to break down the battery acid residue.

翻译

步骤 5

Stray Kids Version 1 Official Light Stick Corroded Battery Terminals Repair: 步骤 5 中的图像 3，3

Use a clean, damp cloth to wipe away the residue. Repeat as needed until the corrosion is removed.
Ensure the light stick is completely dry with a paper towel before inserting new batteries. Moisture can cause further damage to electronic components.

翻译

步骤 6

Use a toothbrush or cotton swab to gently scrub the corroded areas of the battery holder. Be careful not to apply too much pressure to avoid damaging the plastic or metal components.

翻译

步骤 7

Dry the battery holder with a small cloth to air dry completely before reinserting batteries or using it in a device.
Ensure that all moisture has evaporated to prevent further corrosion.

翻译

步骤 8

Check the battery holder for any remaining signs of damage or remaining corrosion.
If the battery holder is damaged consider replacing the battery holder by getting a replacement on Amazon or a rechargeable battery.
Amazon Light Stick Battery Holder Replacment
Rechargeable batteries are less likely to leak and can be reused multiple times.
Avoid Mixing Battery Types Do not mix different types of batteries (e.g., alkaline, lithium, rechargeable) or old and new batteries in the same device. Mixing batteries can lead to uneven discharge rates and increase the risk of leakage.

翻译

步骤 9

Carefully reinsert the batteries into the light stick, ensuring they are appropriately aligned and making good contact with the terminals.
Turn on the light stick and test its functionality to ensure the repair was successful.

翻译

结论

Regular maintenance and prompt action are essential for preserving the performance and longevity of your Stray Kids V.1 light stick. Following these steps and taking preventative measures can effectively address battery acid damage and ensure the continued enjoyment of your favorite K-pop accessory.

Don’t forget to take out the batteries in your light stick after a concert.