跳转到主内容

简介

This guide will you show the proper steps to change the strings on your Stagg Electro-Acoustic Guitar. For this guide you will need a guitar string winder and cutter, as well as your preferred brand of guitar string. This guide will only show how to replace one string but can be repeated to change all of them.

配件

  1. Place the string winder on the tuning key.
    • Place the string winder on the tuning key.

  2. Wind up the string winder counter-clockwise to loosen the strings.
    • Wind up the string winder counter-clockwise to loosen the strings.

  3. With the string clipper, clip the string under the neck of the guitar.
    • With the string clipper, clip the string under the neck of the guitar.

  4. Unwind the string from the machine head and remove it.
    • Unwind the string from the machine head and remove it.

  5. With the string winder pop the string peg out of its hole.
    • With the string winder pop the string peg out of its hole.

  6. Place the colored circle end of the string in the peg hole.
    • Place the colored circle end of the string in the peg hole.

  7. Put the peg in the hole with the string.
    • Put the peg in the hole with the string.

    • Pull the string while pushing the pin in.

  8. Precut the other side of the string by one and a half machine heads.
    • Precut the other side of the string by one and a half machine heads.

  9. Thread the string through the peg.
    • Thread the string through the peg.

    • Wind the string clockwise from top to bottom with the string winder.

    • Do not overlap the string when winding it.

结论

Repeat steps for each string.

Imanuel Martinez

于2020年09月15日注册

169 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 38