跳转到主内容

Spin Master Hatchimal Draggle Fur Replacement

你所需要的

  1. Spin Master Hatchimal Draggle Fur Replacement, Plastic Wing Replacement: 步骤 1 中的图像 1,1
    • lay the Hatchimal on its side.

  2. Spin Master Hatchimal Draggle Fur Replacement: 步骤 2 中的图像 1,1
    • Using the plastic opening tool, push in on the purple clip.

  3. Spin Master Hatchimal Draggle Fur Replacement: 步骤 3 中的图像 1,1
    • Pull the wing off of the hatchimal.

    • The wing should come off with little resistance.

  4. Spin Master Hatchimal Draggle Fur Replacement, Fur Replacement: 步骤 4 中的图像 1,2 Spin Master Hatchimal Draggle Fur Replacement, Fur Replacement: 步骤 4 中的图像 2,2
    • Cut the fur retaining zip-tie with a pair of scissors.

  5. Spin Master Hatchimal Draggle Fur Replacement: 步骤 5 中的图像 1,2 Spin Master Hatchimal Draggle Fur Replacement: 步骤 5 中的图像 2,2
    • Lift the fur up until it can't go further.

  6. Spin Master Hatchimal Draggle Fur Replacement: 步骤 6 中的图像 1,3 Spin Master Hatchimal Draggle Fur Replacement: 步骤 6 中的图像 2,3 Spin Master Hatchimal Draggle Fur Replacement: 步骤 6 中的图像 3,3
    • Use the spudger tool to push up on the black clip to free it.

    • Pull the clip out.

  7. Spin Master Hatchimal Draggle Fur Replacement: 步骤 7 中的图像 1,3 Spin Master Hatchimal Draggle Fur Replacement: 步骤 7 中的图像 2,3 Spin Master Hatchimal Draggle Fur Replacement: 步骤 7 中的图像 3,3
    • Lift fur up to reveal the next set of clips.

    • Insert a spudger to push up on the black clip to free it.

    • Pull out the clip.

  8. Spin Master Hatchimal Draggle Fur Replacement: 步骤 8 中的图像 1,2 Spin Master Hatchimal Draggle Fur Replacement: 步骤 8 中的图像 2,2
    • Lift the fur up and over the Hatchimals Head.

    • Remove the six 12mm Phillips #00 screws from then body.

  9. Spin Master Hatchimal Draggle Fur Replacement: 步骤 9 中的图像 1,2 Spin Master Hatchimal Draggle Fur Replacement: 步骤 9 中的图像 2,2
    • Pull the casing apart.

    • Remove the yellow speaker cable.

  10. Spin Master Hatchimal Draggle Fur Replacement: 步骤 10 中的图像 1,3 Spin Master Hatchimal Draggle Fur Replacement: 步骤 10 中的图像 2,3 Spin Master Hatchimal Draggle Fur Replacement: 步骤 10 中的图像 3,3
    • Remove the three 7mm Phillips #00 screws from the head.

    • Remove the wheel base and the circuit board carefully not to damage the spring.

  11. Spin Master Hatchimal Draggle Fur Replacement: 步骤 11 中的图像 1,2 Spin Master Hatchimal Draggle Fur Replacement: 步骤 11 中的图像 2,2
    • Push the six black fur clips out using the spudger.

    • Remove the fur completely.

结论

To reassemble your device, follow these instructions in reverse order.

Kimberly Searles

于02/14/18注册

340 声望

创作了2篇指南

团队

USF Tampa, Team S1-G5, Nance Spring 2018 USF Tampa, Team S1-G5, Nance Spring 2018 的会员

USFT-NANCE-S18S1G5

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 16

总计 732