修复你的物品 社区 商店

Sphero Ollie Battery Replacement

简介

The battery is like the heart of the Sphere Ollie. Without the battery, the Ollie will be useless and inactive. To replace your battery, you will need a Blue Opening Tool and Phillip's Head Screwdriver to gain access to it.

你所需要的

  1. Sphero Ollie Battery Replacement, Tires and Hubcaps: 步骤 1 中的图像 1，1

    • Firmly grasp Ollie in one hand.

    • Remove the blue rubber tire in a peeling motion with your opposite hand.

    编辑

  2. Sphero Ollie Battery Replacement: 步骤 2 中的图像 1，2 Sphero Ollie Battery Replacement: 步骤 2 中的图像 2，2

    • Continue to firmly hold Ollie in one hand.

    • Use a Plastic Opening Tool to gently pry off the hubcap.

    • Avoid inserting the Plastic Opening Tool into the empty holes, but instead use the tool near the tabs holding the hubcap in.

    • Do not aim the hubcap towards another person as it may pop off with force.

    编辑

  3. Sphero Ollie Battery Replacement, Motherboard: 步骤 3 中的图像 1，1

    • Loosen and remove the 10mm screw on each side of the device using a JIS 1 screwdriver tip.

    • Remove the plastic tire frame from the device

    编辑

  5. Sphero Ollie Battery Replacement: 步骤 4 中的图像 1，2 Sphero Ollie Battery Replacement: 步骤 4 中的图像 2，2

    • Loosen and remove the four 10mm Screws on the underside of the device using a JIS 1 tip.

    • Firmly grasp the bottom of the device and pull the top half of the outer case off of the bottom.

    编辑

  6. Sphero Ollie Battery Replacement: 步骤 5 中的图像 1，2 Sphero Ollie Battery Replacement: 步骤 5 中的图像 2，2

    • Loosen and remove the 10mm screws holding the blue tooth connector as well as the two 1 10 screws holding the motherboard to the case using the JIS #1 screwdriver

    • Loosen and remove the 10mm screws holding the antenna to the case.

    • Gently remove mother board from the case with an upward motion.

    编辑

  7. Sphero Ollie Battery Replacement, Battery: 步骤 6 中的图像 1，3 Sphero Ollie Battery Replacement, Battery: 步骤 6 中的图像 2，3 Sphero Ollie Battery Replacement, Battery: 步骤 6 中的图像 3，3

    • After you have removed the motherboard, use a JIS #1 screwdriver to remove the four 10mm Screws holding in the cog shields.

    • Next, you want to pull apart the clips (two on each side) holding the top piece of the shield to the frame.

    • Then, once you have freed the cogs, you can lift the cog and remove it from the frame.

    • To completely remove the cog shield out of the way, carefully remove the black pin connectors from the slot in the shield.

    编辑

  8. Sphero Ollie Battery Replacement: 步骤 7 中的图像 1，2 Sphero Ollie Battery Replacement: 步骤 7 中的图像 2，2

    • Once you have removed the cog out of the way, you can then pinch the clip to access the battery.

    • To remove the battery, simply pull on it with slight force as it is held tight by adhesives.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

12等其他人完成本指南。

作者

与3其他贡献者

Krystal Hedrick

于10/30/17注册

361 声望

创作了3篇指南

徽章: 11

+ 8更多徽章

团队

UW Tacoma, Team S1-G3, Rose Fall 2017 UW Tacoma, Team S1-G3, Rose Fall 2017 的会员

UWT-ROSE-F17S1G3

4 名成员

创作了10篇指南

7条评论

How do you buy a new battery, where do you get them from?

Alex - 回复

Alex,

Amazon (Uxcell Power Supply DC 3.7 V 1000 MAh 803040 Li-ion rechargeable lithium Polymer Li- Po Battery

Keith Johnson -

Yes I need to find a battery as well

Keith Johnson - 回复

Need a battery email me terrys2207@yahoo.co.uk

Terry Saunders - 回复

Can I get a motherboard replaced in ollie. Please help me with reply to my email sgandham1980@icloud.com

gandham santhosh - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 16

过去 30 天： 63

总计 7,620