跳转到主内容

Zenbre SoundBank Z3 Speaker Grill Replacement

你所需要的

  1. Zenbre SoundBank Z3 Speaker Grill Replacement, Bottom Cover: 步骤 1 中的图像 1,2 Zenbre SoundBank Z3 Speaker Grill Replacement, Bottom Cover: 步骤 1 中的图像 2,2
    • Power off the SoundBank Z3.

    • Turn over the device.

    • Peel the silicone feet up to remove.

    • No extra adhesive is needed to reapply the feet as long as the sticky side is not touched.

  2. Zenbre SoundBank Z3 Speaker Grill Replacement: 步骤 2 中的图像 1,1
    • Remove all eight of the 11 mm Phillips screws from the bottom of the device.

  3. Zenbre SoundBank Z3 Speaker Grill Replacement: 步骤 3 中的图像 1,2 Zenbre SoundBank Z3 Speaker Grill Replacement: 步骤 3 中的图像 2,2
    • Remove the bottom panel speaker using an iFixit opening tool.

  4. Zenbre SoundBank Z3 Speaker Grill Replacement, Motherboard Cover: 步骤 4 中的图像 1,3 Zenbre SoundBank Z3 Speaker Grill Replacement, Motherboard Cover: 步骤 4 中的图像 2,3 Zenbre SoundBank Z3 Speaker Grill Replacement, Motherboard Cover: 步骤 4 中的图像 3,3
    • Remove the four 4.5 mm silver Phillips screws that secure the plastic panel covering the motherboard.

    • Remove the plastic panel.

  5. Zenbre SoundBank Z3 Speaker Grill Replacement, Speaker Grill: 步骤 5 中的图像 1,3 Zenbre SoundBank Z3 Speaker Grill Replacement, Speaker Grill: 步骤 5 中的图像 2,3 Zenbre SoundBank Z3 Speaker Grill Replacement, Speaker Grill: 步骤 5 中的图像 3,3
    • Remove the three silver Phillips screws from the plastic ring that holds the speaker in place.

    • Be careful not to rip out the speaker while taking out the screws

    • The same steps can be done on the other side of the speaker

  6. Zenbre SoundBank Z3 Speaker Grill Replacement: 步骤 6 中的图像 1,3 Zenbre SoundBank Z3 Speaker Grill Replacement: 步骤 6 中的图像 2,3 Zenbre SoundBank Z3 Speaker Grill Replacement: 步骤 6 中的图像 3,3
    • First, remove the speaker from the motherboard, then remove the ring that held the speaker in place.

    • These are the joints that need to be soldered. Follow this guide link to help you remove the wires from the motherboard.

    • How To Solder and Desolder Connections

  7. Zenbre SoundBank Z3 Speaker Grill Replacement: 步骤 7 中的图像 1,2 Zenbre SoundBank Z3 Speaker Grill Replacement: 步骤 7 中的图像 2,2
    • With the plastic ring removed, the speaker should slide out easily.

    • Be careful not remove other components in the speaker

    • This will expose the speaker grill

  8. Zenbre SoundBank Z3 Speaker Grill Replacement: 步骤 8 中的图像 1,3 Zenbre SoundBank Z3 Speaker Grill Replacement: 步骤 8 中的图像 2,3 Zenbre SoundBank Z3 Speaker Grill Replacement: 步骤 8 中的图像 3,3
    • Now that the speaker has been removed, the plastic grill should be visible.

    • With a little bit of force they can be pushed out.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

团队

UMass Dartmouth, Team 3-2, Bhusal Spring 2016 UMass Dartmouth, Team 3-2, Bhusal Spring 2016 的会员

UMASSD-BHUSAL-S16S3G2

5 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 513