跳转到主内容

简介

Also known as Xperia Z LT36i, Xperia C6603, Xperia C6602, Xperia Z LTE, Xperia Z HSPA+

How to change broken, not working Digitizer or Display.

This procedure is very hard. You must have experience to do this.


Please SUBSCRIBE to my channel ツ

视频概述

  1. Warm the Battery cover before disassemble it. Warm the Battery cover before disassemble it. Warm the Battery cover before disassemble it.
    • Warm the Battery cover before disassemble it.

  2. 'Carefully' warm the battery too 'Carefully' warm the battery too 'Carefully' warm the battery too
    • 'Carefully' warm the battery too

  3. Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board. Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board. Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board.
    • Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board.

  4. iPhone 电池维修工具包

    只要 $29.99

    Buy Now

    iPhone 电池维修工具包

    只要 $29.99

    Buy Now
  5. This are: main Camera, front Camera and antenna wire Flex cable. Now we can remove the Motherboard. Now we can remove the Motherboard.
    • This are: main Camera, front Camera and antenna wire Flex cable.

    • Now we can remove the Motherboard.

  6. The Headphone connector and the Ringer / Cover / Signal Antenna module. The Headphone connector and the Ringer / Cover / Signal Antenna module. The Headphone connector and the Ringer / Cover / Signal Antenna module.
    • The Headphone connector and the Ringer / Cover / Signal Antenna module.

  7. Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go. Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go. Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go.
    • Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go.

  8. Warm the Touch screen before you start to disassemble it. Warm the Touch screen before you start to disassemble it. Warm the Touch screen before you start to disassemble it.
    • Warm the Touch screen before you start to disassemble it.

  9. Let's assemble the new spare part. Let's assemble the new spare part. Let's assemble the new spare part.
    • Let's assemble the new spare part.

  10. All's well, that ends well. :) . Did you do it successfully?
结论

To reassemble your device, follow these instructions in reverse order.

76等其他人完成本指南。

ZFix

于2013年12月09日注册

164,619 信誉积分

创作了305篇指南

团队

Master Techs Master Techs 的会员

Community

286 名成员

创作了809篇指南

Same procedure with Sony Xperia Z2?

Fredrik - 回复

How do you warm it? With what and what temperature ?

Jeroen - 回复

with a hairdryer for like 3 min on high

Peter Tembo -

With hair dryer.

ZFix - 回复

Same procedure with Sony Xperia Z1? Where do i get the screen parts?

chrgro - 回复

添加评论

浏览统计数据:

过去的24小时: 10

过去的7天: 56

过去的30天: 222

总计 229,121