修复你的物品

维修的权力

商店

本指南有更多最近的更新。切换到最新的未经核实的版本。

Sony Xperia XA Back Cover Replacement

撰写者： Anthony Hernandez (和另外4个贡献者)
  • 评论： 1
  • 收藏 0

难度

中等

步骤

6

所需时间

10分钟

节

1

标志

1

Prerequisite Only

仅作为前提条件

请注意，本指南只是其他指南的前提条件。

简介

You will need to use a source of heat. You may need to buy adhesive for the reassembly. Make sure the phone is completely powered off before opening the device.

  1. Apply heat on the back surface of the phone.

    • Apply heat on the back surface of the phone.

    • Continue to heat the device as needed throughout the replacement process.

    • The device can get very hot, so be careful when handling it.

    翻译

  2. Stick the small suction cup on the bottom half of the back surface of the phone.

    • Stick the small suction cup on the bottom half of the back surface of the phone.

    翻译

  3. Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物

    Essential 工具包

    我们最紧凑的套装中最有用的工具。

    现在开始购物

  4. With the bottom of the device facing you, lift up on the suction cup handle. Use the plastic opening tool around all sides to pry off the back cover. Use the plastic opening tool around all sides to pry off the back cover.

    • With the bottom of the device facing you, lift up on the suction cup handle.

    • Use the plastic opening tool around all sides to pry off the back cover.

    翻译

  5. Pull the back of the phone case away from the device. You will hear popping sounds of glue being ripped from the phone. You will hear the sound of the back unlatching from the device.

    • Pull the back of the phone case away from the device.

    • You will hear popping sounds of glue being ripped from the phone.

    • You will hear the sound of the back unlatching from the device.

    • You will need to apply adhesive or glue along the device to have maximum seal in reassembly.

    • RAF antenna may be attached to the back cover upon removal.

    翻译

  6. Apply heat to the copper RAF antenna.

    • Apply heat to the copper RAF antenna.

    • This step and the following step only apply if the RAF antenna does not come off when taking the back cover off.

    翻译

  7. Peel back the RAF antenna.

    • Peel back the RAF antenna.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

Anthony Hernandez

于2018年04月18日注册

727 信誉积分

创作了3篇指南

徽章: 7

+ 4更多徽章

团队

Cal Poly, Team S17-G2, Livingston Spring 2018 Cal Poly, Team S17-G2, Livingston Spring 2018 的会员

CPSU-LIVINGSTON-S18S17G2

4 名成员

创作了8篇指南

0条评论

添加一条评论

添加评论

浏览统计数据:

过去的24小时： 0

过去的7天： 0

过去的30天： 0

总计 48