跳转到主内容

Sony Xperia J Volume/Lock Buttons Replacement

你所需要的

  1. Sony Xperia J Volume/Lock Buttons Replacement, External Features: 步骤 1 中的图像 1,1
    • You will need a Torx T5 screwdriver, plastic opening tool, and a pincet for this operation.

  2. Sony Xperia J Volume/Lock Buttons Replacement: 步骤 2 中的图像 1,1
    • Find the little bracket on the bottom left of the phone (when looking at it upside down) and use the opening tool to pry off the back cover.

  3. Sony Xperia J Volume/Lock Buttons Replacement: 步骤 3 中的图像 1,1
    • Remove the silicone cover by squeezing it with the tweezers, there is not much pressure needed.

  4. Sony Xperia J Volume/Lock Buttons Replacement: 步骤 4 中的图像 1,3 Sony Xperia J Volume/Lock Buttons Replacement: 步骤 4 中的图像 2,3 Sony Xperia J Volume/Lock Buttons Replacement: 步骤 4 中的图像 3,3
    • Using the Torx T5 screwdriver remove the four 4.74mm screws.

    • Then remove the two 3.13mm screws

    • Lastly remove 5.90mm screw.

  5. Sony Xperia J Volume/Lock Buttons Replacement: 步骤 5 中的图像 1,3 Sony Xperia J Volume/Lock Buttons Replacement: 步骤 5 中的图像 2,3 Sony Xperia J Volume/Lock Buttons Replacement: 步骤 5 中的图像 3,3
    • Using the tweezers remove the black plate at the bottom of the phone. First insert the tweezers tip at the intersection between the black plate and phone, then just pull the plate up.

    • Repeat the same steps to remove the black plates located at the top left, and top right of the phone.

  6. Sony Xperia J Volume/Lock Buttons Replacement: 步骤 6 中的图像 1,1
    • After removing the top left black plate, you will find another 3.13mm screw. Just remove it by using the screwdriver.

  7. Sony Xperia J Volume/Lock Buttons Replacement: 步骤 7 中的图像 1,1
    • Place the plastic opening tool in-between the black external case of the phone and the silver case, then move it along the edges of the phone to detach the plates.

  8. Sony Xperia J Volume/Lock Buttons Replacement, Volume/Lock Buttons: 步骤 8 中的图像 1,2 Sony Xperia J Volume/Lock Buttons Replacement, Volume/Lock Buttons: 步骤 8 中的图像 2,2
    • Grabbing the silver plate you just removed, locate the volume and lock switch on the upper right of it.

    • Using the tweezers, unclip the two silicone gel clips located at the ends of the keys.

    • Once the buttons are uncliped, push the keys from the outside to the inside.(As in the second picture)

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Arlind

于01/21/15注册

899 声望

创作了5篇指南

团队

USF Tampa, Team 4-3, Brown Winter 2015 USF Tampa, Team 4-3, Brown Winter 2015 的会员

USFT-BROWN-W15S4G3

3 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 3

总计 715