1. Remove the two black 6.4mm Phillips screws from the back of the device. Remove the two black 6.4mm Phillips screws from the back of the device. Remove the two black 6.4mm Phillips screws from the back of the device.
    • Remove the two black 6.4mm Phillips screws from the back of the device.

  2. Using a plastic opening tool, work your way around the edges of the device, carefully prying off the front panel. Using a plastic opening tool, work your way around the edges of the device, carefully prying off the front panel. Using a plastic opening tool, work your way around the edges of the device, carefully prying off the front panel.
    • Using a plastic opening tool, work your way around the edges of the device, carefully prying off the front panel.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  4. Remove the two 2.8 mm phillips screws located on either side of the device near the top. Remove the two 2.8 mm phillips screws located on either side of the device near the top.
    • Remove the two 2.8 mm phillips screws located on either side of the device near the top.

  5. Carefully pull the top piece away from the device. Carefully pull the top piece away from the device.
    • Carefully pull the top piece away from the device.

  6. Use the flat end of the spudger to flip up the retaining flap for the bluetooth module. Be sure to lift up on the retaining flap, and not the socket itself. Be sure to lift up on the retaining flap, and not the socket itself.
    • Use the flat end of the spudger to flip up the retaining flap for the bluetooth module.

    • Be sure to lift up on the retaining flap, and not the socket itself.

  7. Remove the two 1.8mm silver Phillips screws on the Bluetooth module. Lift up on and remove the Bluetooth module. The ribbon cable must first be removed in order to access the highlighted screw.
    • Remove the two 1.8mm silver Phillips screws on the Bluetooth module.

    • Lift up on and remove the Bluetooth module.

    • The ribbon cable must first be removed in order to access the highlighted screw.

结论

To reassemble your device, follow these instructions in reverse order.

John Ferguson

于2015年01月21日注册

597 信誉积分

创作了5篇指南

团队

USF Tampa, Team 4-2, Brown Winter 2015 USF Tampa, Team 4-2, Brown Winter 2015 的会员

USFT-BROWN-W15S4G2

4 名成员

创作了6篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 354