简介

This guide will help you disassemble your Sony Vaio PCG-7A2L Laptop in order to replace or remove the optical drive.

Lay the closed laptop on its screen so the bottom is facing towards you.
  • Lay the closed laptop on its screen so the bottom is facing towards you.

添加评论

Push both latches towards the center of the battery.
  • Push both latches towards the center of the battery.

添加评论

Revome the battery by pushing it away from the laptop. Set the battery away from the laptop.
  • Revome the battery by pushing it away from the laptop.

  • Set the battery away from the laptop.

添加评论

With the bottom of the laptop facing up, locate the RAM cover. The RAM is covered by the panel with four columns of vents.
  • With the bottom of the laptop facing up, locate the RAM cover.

  • The RAM is covered by the panel with four columns of vents.

  • Locate the screw (Length: 4.8 mm) holding down the panel, which is near the edge of the laptop. Unscrew it with your phillips #0 screwdriver.

添加评论

Use your fingers to slide the cover away from the laptop. (It will only slide a few millimeters) Once the panel is out of its locked position, it can be lifted out without any resistance. Once the panel is out of its locked position, it can be lifted out without any resistance.
  • Use your fingers to slide the cover away from the laptop. (It will only slide a few millimeters)

  • Once the panel is out of its locked position, it can be lifted out without any resistance.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Locate and remove the screw (Length: 7.7mm) for the hard drive cover. Slide the cover until it is free from the laptop case. Lift the cover to remove.
  • Locate and remove the screw (Length: 7.7mm) for the hard drive cover.

  • Slide the cover until it is free from the laptop case.

  • Lift the cover to remove.

添加评论

Locate and remove the four screws (Length: 7.7mm) holding the Hard Drive tray in place. Using the tab on the tray, slide the Hard Drive away from the main body of the laptop. The Hard Drive should now be disconnected.
  • Locate and remove the four screws (Length: 7.7mm) holding the Hard Drive tray in place.

  • Using the tab on the tray, slide the Hard Drive away from the main body of the laptop.

  • The Hard Drive should now be disconnected.

  • Lift the drive out with the tab on the tray.

添加评论

Locate the screws highlighted here.  There are 16 total.
  • Locate the screws highlighted here. There are 16 total.

  • Using a Phillips #0 screwdriver, remove the screws (Length: 6.8mm) and place them on a tray for later use.

添加评论

Before you proceed, make sure you pay special attention to the way the small plastic part that covers the radiator fins is held in place.  You will need to know how it attaches when you reassemble the laptop. You do not need to actually remove the part at this time.  It is held in place by the rest of the back cover and will fall off when back cover is removed in the next step. You do not need to actually remove the part at this time.  It is held in place by the rest of the back cover and will fall off when back cover is removed in the next step.
  • Before you proceed, make sure you pay special attention to the way the small plastic part that covers the radiator fins is held in place. You will need to know how it attaches when you reassemble the laptop.

  • You do not need to actually remove the part at this time. It is held in place by the rest of the back cover and will fall off when back cover is removed in the next step.

添加评论

After removing the screws, use your fingers to lift the back cover off the laptop. After removing the screws, use your fingers to lift the back cover off the laptop.
  • After removing the screws, use your fingers to lift the back cover off the laptop.

添加评论

Remove the back cover and place it somewhere safe so you can locate it later.
  • Remove the back cover and place it somewhere safe so you can locate it later.

添加评论

Locate and remove the screws (Length: 5.8mm) affixing the drive to the laptop frame. Gently slide the drive away from the body of the laptop until it is disconnected. Lift the drive out.
  • Locate and remove the screws (Length: 5.8mm) affixing the drive to the laptop frame.

  • Gently slide the drive away from the body of the laptop until it is disconnected.

  • Lift the drive out.

添加评论

Once the drive is removed from the main body of the laptop, you will need to remove the two connecting brackets. Locate the screws for the brackets. There should be one on each side of the drive and two on the end that connects to the computer. Unscrew and remove the brackets.
  • Once the drive is removed from the main body of the laptop, you will need to remove the two connecting brackets.

  • Locate the screws for the brackets. There should be one on each side of the drive and two on the end that connects to the computer.

  • Unscrew and remove the brackets.

添加评论

The last step is to remove the tray cover (the part that is exposed when the tray is closed).
  • The last step is to remove the tray cover (the part that is exposed when the tray is closed).

  • The next two steps are not necessary if your replacement drive came with a tray cover already attached.

  • Open the drive by poking a straightened paper clip in the small hole on the front of the tray cover.

添加评论

Locate the two tabs on the inside of the cover that hold it in place. Use a spudger or similar tool to unclip each tab. The cover should come right off. Use a spudger or similar tool to unclip each tab. The cover should come right off.
  • Locate the two tabs on the inside of the cover that hold it in place.

  • Use a spudger or similar tool to unclip each tab. The cover should come right off.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Matt McCarty

于2010年04月15日注册

220 信誉积分

创作了2篇指南

团队

Cal Poly, Team 24-32, Regan Spring 2010 Cal Poly, Team 24-32, Regan Spring 2010 的会员

CPSU-REGAN-S10S24G32

4 名成员

创作了8篇指南

To Clarify: Will the Vaio be usable w/o the optical drive once it has been reassembled?

Rock - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 8

过去的30天: 27

总计 8,342