简介

How to replace or add memory to your Sony VAIO PCG-933A laptop.

配件

无需配件。

  1. Turn the laptop upside down The battery is located on the front right side of the laptop; the opposite side from the floppy disk drive.
    • Turn the laptop upside down

    • The battery is located on the front right side of the laptop; the opposite side from the floppy disk drive.

  2. As shown by the arrow, slide the plastic cover up and then pull out and downwards. You should now be able to pull the battery out. You should now be able to pull the battery out.
    • As shown by the arrow, slide the plastic cover up and then pull out and downwards.

    • You should now be able to pull the battery out.

  3. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. With the laptop facing you, flip the laptop upside down.
    • With the laptop facing you, flip the laptop upside down.

  5. Remove the 4mm Phillips screw that holds the small panel in the center of the laptop in place. Then remove the panel covering the RAM. The RAM should now be visible.
    • Remove the 4mm Phillips screw that holds the small panel in the center of the laptop in place.

    • Then remove the panel covering the RAM.

    • The RAM should now be visible.

  6. Release the plastic switches on each side of the stick of RAM. Carefully slide the stick of RAM out at an angle. DO NOT FORCE OUT.
    • Release the plastic switches on each side of the stick of RAM.

    • Carefully slide the stick of RAM out at an angle.

    • DO NOT FORCE OUT.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Sara Lillard

于2011年04月11日注册

117 信誉积分

创作了8篇指南

团队

Cal Poly, Team 12-36, Maness Spring 2011 Cal Poly, Team 12-36, Maness Spring 2011 的会员

CPSU-MANESS-S11S12G36

4 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 2

总计 1,737