跳转到主内容

配件

没有特定配件。

  1. Remove the 6 philips head screws using the PH1 bit.
    • Remove the 6 philips head screws using the PH1 bit.

  2. Remove the 3 philips head screws holding in the green circuit board
    • Remove the 3 philips head screws holding in the green circuit board

  3. Unclip the battery pack and replace it with another one.
    • Unclip the battery pack and replace it with another one.

    the flat cable being short might disconnect.

    If so reconnect the flat cable then connect the battery

    sylvain erdman - 回复

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Seth Taylor Rollins

于2017年01月17日注册

197 信誉积分

撰写一个指南

一条评论

Can you give the battery # on this please

Dan Clark - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 12

过去的30天: 82

总计 4,739