修复你的物品 社区 商店

Sony NEX-7 LCD Assembly Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

你所需要的

  1. Sony NEX-7 LCD Assembly Replacement, LCD Assembly: 步骤 1 中的图像 1，1

    • Remove the two 3/32" #00 screws located next to the viewfinder using the Phillips #00 screwdriver.

    编辑

  2. Sony NEX-7 LCD Assembly Replacement: 步骤 2 中的图像 1，1

    • Use a Phillips #00 screwdriver to remove the two screws from the right side of the camera below the D ring:

    • The 5/32" upper screw

    • The 3/32" lower screw

    编辑

  3. Sony NEX-7 LCD Assembly Replacement: 步骤 3 中的图像 1，1

    • Remove two more 3/32" #00 screws from the bottom of the camera using the Phillips #00 screwdriver.

    编辑

  5. Sony NEX-7 LCD Assembly Replacement: 步骤 4 中的图像 1，1

    • Remove two more 3/32" #00 screws from the metal bracket on the left side of the camera using the Phillips #00 screwdriver.

    编辑

  6. Sony NEX-7 LCD Assembly Replacement: 步骤 5 中的图像 1，1

    • Unplug the orange ribbon cable on the top right of the camera next to the metal bracket by applying tweezers to the tabs on either side of the plug.

    编辑

  7. Sony NEX-7 LCD Assembly Replacement: 步骤 6 中的图像 1，1

    • Before pulling off the assembly, fold the rightmost tab of the flexible circuit board away from the metal bracket.

    编辑

  8. Sony NEX-7 LCD Assembly Replacement: 步骤 7 中的图像 1，2 Sony NEX-7 LCD Assembly Replacement: 步骤 7 中的图像 2，2

    • The LCD assembly is attached with a concealed ribbon cable, so be gentle when you remove it.

    • The D ring brackets on either side are not attached, only held in mechanically. Once the LCD assembly starts to come out, they will detach.

    • Pull on the D rings on either side of the camera to start removing the assembly.

    • Once the brackets are cleared from black shell, take them off and set them aside.

    • Continue to remove the screen assembly.

    编辑

  9. Sony NEX-7 LCD Assembly Replacement: 步骤 8 中的图像 1，1

    • With the camera face down, move the assembly away from you to get a clear view of the wide ribbon cable.

    • Unplug the cable by applying tweezers to the tabs on either side of the plug.

    • Set the LCD assembly aside.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与6其他贡献者

Jay Miley

于04/22/14注册

5,046 声望

创作了13篇指南

徽章: 27

+ 24更多徽章

团队

Cal Poly, Team 10-55, Amido Spring 2014 Cal Poly, Team 10-55, Amido Spring 2014 的会员

CPSU-AMIDO-S14S10G55

4 名成员

创作了31篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 64