跳转到主内容

简介

Use this guide to open the battery compartment and replace the battery.

  1. We need to turn off the camera because we are removing components that could get damaged if the power is still on. If the camera is on, rotate the power switch on top of the camera counterclockwise to turn the camera off.
    • We need to turn off the camera because we are removing components that could get damaged if the power is still on.

    • If the camera is on, rotate the power switch on top of the camera counterclockwise to turn the camera off.

  2. Flip the camera over such that the power switch points down.
    • Flip the camera over such that the power switch points down.

    • Slide the switch on the bottom of the camera grip towards the lens to open the battery door.

  3. With the battery door open, push the blue lever in the battery compartment to release the battery.
    • With the battery door open, push the blue lever in the battery compartment to release the battery.

结论

To replace the battery, fit it in the slot, then close and lock the door.

2等其他人完成本指南。

Tyler

于2014年04月22日注册

533 信誉积分

撰写一个指南

团队

Cal Poly, Team 10-55, Amido Spring 2014 Cal Poly, Team 10-55, Amido Spring 2014 的会员

CPSU-AMIDO-S14S10G55

4 名成员

创作了31篇指南

一条评论

I’ve done this about a million times. :)

Martin Hurley - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 4

过去的30天: 17

总计 1,697