修复你的物品 社区 商店

Sony NEX-5T Motherboard

简介

The motherboard is the brains of the camera. Replacing the motherboard requires completely opening up the camera.

你所需要的

  1. Sony NEX-5T Motherboard, Battery: 步骤 1 中的图像 1，1

    • Open the battery compartment by sliding the lock to the right.

    编辑

  2. Sony NEX-5T Motherboard: 步骤 2 中的图像 1，1

    • Push in the blue lever.

    • The battery is on a spring so make sure you have control over it, or it might fly out.

    编辑

  3. Sony NEX-5T Motherboard: 步骤 3 中的图像 1，2 Sony NEX-5T Motherboard: 步骤 3 中的图像 2，2

    • Pull the battery out.

    编辑

  4. Sony NEX-5T Motherboard, SD Card: 步骤 4 中的图像 1，3 Sony NEX-5T Motherboard, SD Card: 步骤 4 中的图像 2，3 Sony NEX-5T Motherboard, SD Card: 步骤 4 中的图像 3，3

    • Make sure to turn the cameras power switch to off before beginning this step.

    • Begin by holding the camera upside down with the bottom facing you. Identify the housing for the SD card, and battery.

    • You will use your other hand to slide the lock switch to this housing to the right. This will release the cap, allow it to come upwards.

    编辑

  5. Sony NEX-5T Motherboard: 步骤 5 中的图像 1，3 Sony NEX-5T Motherboard: 步骤 5 中的图像 2，3 Sony NEX-5T Motherboard: 步骤 5 中的图像 3，3

    • Now that the cap to the battery and SD card housing is open, the SD card is visible.

    • You will need to press down on the SD card until you hear a click. Release the SD card and it will now be available to remove.

    • Grip the SD card and pull it out of the SD card slot.

    编辑

  6. Sony NEX-5T Motherboard: 步骤 6 中的图像 1，3 Sony NEX-5T Motherboard: 步骤 6 中的图像 2，3 Sony NEX-5T Motherboard: 步骤 6 中的图像 3，3

    • To reinsert the SD card place it in its housing.

    • You will then need to push down on the SD card until you hear a click.

    • To ensure the SD card is in place you can visually inspect it. The SD card should be flush with the housing.

    编辑

  7. Sony NEX-5T Motherboard: 步骤 7 中的图像 1，3 Sony NEX-5T Motherboard: 步骤 7 中的图像 2，3 Sony NEX-5T Motherboard: 步骤 7 中的图像 3，3

    • You may now close the housing for the SD card and battery.

    • Close the cap and while holding it down slide the locking tab to the left. This step should lock the cap in place.

    • Your SD card is now safely in place and you may turn your device on.

    编辑

  8. Sony NEX-5T Motherboard, Motherboard: 步骤 8 中的图像 1，1

    • Remove the 3.5 mm exterior-side screw.

    编辑

  9. Sony NEX-5T Motherboard: 步骤 9 中的图像 1，1

    • Remove the 3.5 mm bottom screw from the battery compartment.

    编辑

  10. Sony NEX-5T Motherboard: 步骤 10 中的图像 1，1

    • Pry off the front-side cover with the small plastic spudger.

    • There is a adhesive holding the front-side cover to the camera frame, so more force may be necessary to remove it. Be careful as to not break the cover while prying.

    编辑

  11. Sony NEX-5T Motherboard: 步骤 11 中的图像 1，1

    • Remove the 3.5 mm bottom screws.

    编辑

  13. Sony NEX-5T Motherboard: 步骤 12 中的图像 1，2 Sony NEX-5T Motherboard: 步骤 12 中的图像 2，2

    • Open the USB cover on the side of the camera.

    • Remove the 3.5 mm USB side screws.

    编辑

  14. Sony NEX-5T Motherboard: 步骤 13 中的图像 1，1

    • Remove the 4mm screws at the back of the battery compartment.

    编辑

  15. Sony NEX-5T Motherboard: 步骤 14 中的图像 1，1

    • Remove the 3.5 mm top flash-mount screw.

    编辑

  16. Sony NEX-5T Motherboard: 步骤 15 中的图像 1，1

    • Flip the screen up.

    • Pry the top cover off with the small plastic spudger.

    编辑

  17. Sony NEX-5T Motherboard: 步骤 16 中的图像 1，2 Sony NEX-5T Motherboard: 步骤 16 中的图像 2，2

    • Pry the top part rear cover off with plastic spudger.

    • Flip the camera so the sensor faces down and push up on the rear cover from the battery compartment.

    编辑

  18. Sony NEX-5T Motherboard: 步骤 17 中的图像 1，1

    • Remove the 2.25 mm tripod mount screws.

    编辑

  19. Sony NEX-5T Motherboard: 步骤 18 中的图像 1，2 Sony NEX-5T Motherboard: 步骤 18 中的图像 2，2

    • Remove the 2.25 mm side lanyard mount screw.

    • Pull the lanyard mount to remove.

    编辑

  20. Sony NEX-5T Motherboard: 步骤 19 中的图像 1，1

    • Remove the 2.25 mm screws from the top.

    编辑

  21. Sony NEX-5T Motherboard: 步骤 20 中的图像 1，1

    • Using the tweezers, pull out the rubber grommet.

    • There is nothing holding the grommet in other than friction.

    • The grommet is small, don't lose it.

    编辑

  22. Sony NEX-5T Motherboard: 步骤 21 中的图像 1，1

    • Pull the lead that was under the grommet out from the frame.

    编辑

  23. Sony NEX-5T Motherboard: 步骤 22 中的图像 1，2 Sony NEX-5T Motherboard: 步骤 22 中的图像 2，2

    • Flip the rotary selector and controls up over the top.

    • Holding the controls in place, pull the two frame pieces apart.

    • There is a connection between the motherboard and the LCD screen still attached to both halves, so don't pull to hard.

    编辑

  24. Sony NEX-5T Motherboard: 步骤 23 中的图像 1，1

    • Disconnect the connection between the motherboard and LCD screen by pulling out the connector in the direction of the arrow.

    编辑

  25. Sony NEX-5T Motherboard: 步骤 24 中的图像 1，2 Sony NEX-5T Motherboard: 步骤 24 中的图像 2，2

    • Using the tweezers, disconnect the metal lead at the top of the motherboard by pulling up.

    编辑

  26. Sony NEX-5T Motherboard: 步骤 25 中的图像 1，3 Sony NEX-5T Motherboard: 步骤 25 中的图像 2，3 Sony NEX-5T Motherboard: 步骤 25 中的图像 3，3

    • Disconnect the two top-right connectors by pulling them up towards the top.

    编辑

  27. Sony NEX-5T Motherboard: 步骤 26 中的图像 1，2 Sony NEX-5T Motherboard: 步骤 26 中的图像 2，2

    • Disconnect the two connectors on the right by pulling them to the right.

    编辑

  28. Sony NEX-5T Motherboard: 步骤 27 中的图像 1，2 Sony NEX-5T Motherboard: 步骤 27 中的图像 2，2

    • Using the tweezers, flip open the black door on the large connector on the bottom.

    • Remove the connector by pulling it away from the motherboard.

    编辑

  29. Sony NEX-5T Motherboard: 步骤 28 中的图像 1，2 Sony NEX-5T Motherboard: 步骤 28 中的图像 2，2

    • Using the tweezers, flip open the door on the smaller connector.

    • Remove the connector by pulling it away from the motherboard.

    • This is the same process for from the previous step.

    编辑

  30. Sony NEX-5T Motherboard: 步骤 29 中的图像 1，2 Sony NEX-5T Motherboard: 步骤 29 中的图像 2，2

    • Disconnect the connector that goes through the motherboard.

    • There is no door on this connector.

    编辑

  31. Sony NEX-5T Motherboard: 步骤 30 中的图像 1，1

    • Remove the 4 mm screws securing the motherboard to the frame.

    编辑

  32. Sony NEX-5T Motherboard: 步骤 31 中的图像 1，2 Sony NEX-5T Motherboard: 步骤 31 中的图像 2，2

    • With the tweezers, remove the metal speaker cover.

    • Pull the speaker out of the frame.

    • Remember how the wires lay back in the frame for reassembly.

    编辑

  33. Sony NEX-5T Motherboard: 步骤 32 中的图像 1，1

    • Flip the motherboard up and disconnect the connector on the back.

    • Seperate the motherboard from the frame.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

William Kleinman

于03/02/17注册

301 声望

创作了3篇指南

徽章: 4

+1个徽章

团队

USF Tampa, Team S13-G2, Cagle Spring 2017 USF Tampa, Team S13-G2, Cagle Spring 2017 的会员

USFT-CAGLE-S17S13G2

3 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 7

总计 814