简介

Following this guides shows you how to remove the cassette lid from the device. Removing the cassette lid allows you to install a new one and enables you to remove the mechanism deck

配件

无需配件。

Using a spudger, apply pressure towards the back corner of the cassette compartment to the plastic tab directly behind the gold cone. Pushing the tab allows the hinge to be separated from the body of the device. The third picture shows the what the tab looks like when the device is disassembled, and illustrates the direction to apply pressure.
  • Using a spudger, apply pressure towards the back corner of the cassette compartment to the plastic tab directly behind the gold cone.

  • Pushing the tab allows the hinge to be separated from the body of the device.

  • The third picture shows the what the tab looks like when the device is disassembled, and illustrates the direction to apply pressure.

添加评论

Next, use a plastic opening tool to pull the metal latch towards the speaker. The latch should be clear of the slot in the cassette lid.
  • Next, use a plastic opening tool to pull the metal latch towards the speaker.

  • The latch should be clear of the slot in the cassette lid.

  • Be careful not to bend the latch too far, as it may warp.

添加评论

Carefully lift the cassette lid, making sure the tab and latch are free from connection.
  • Carefully lift the cassette lid, making sure the tab and latch are free from connection.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Scott

于2012年01月21日注册

1 信誉积分

撰写一个指南

团队

Cal Poly, Team 10-34, Amido Winter 2012 Cal Poly, Team 10-34, Amido Winter 2012 的会员

CPSU-AMIDO-W12S10G34

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 11

总计 846