简介

In order to keep your device in working order, the tape transport unit may need to be replaced.

配件

无需配件。

  1. Remove the eight (8) Phillips #00 screws. There are six (6) screws on the bottom of the camera and two (2) screws beneath the back light button.
    • Remove the eight (8) Phillips #00 screws. There are six (6) screws on the bottom of the camera and two (2) screws beneath the back light button.

  2. Remove the five (5) Phillips #00 cassette side screws.
    • Remove the five (5) Phillips #00 cassette side screws.

  3. Remove the three (3) Phillips #00 screws located on the top of the lens side cover.
    • Remove the three (3) Phillips #00 screws located on the top of the lens side cover.

  4. Remove the Phillips #00 screw holding the microphone on.
    • Remove the Phillips #00 screw holding the microphone on.

  5. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  6. Remove the two (2) Phillips #00 screws from lens side cover.
    • Remove the two (2) Phillips #00 screws from lens side cover.

  7. Slide the lens side cover away from camera.
    • Slide the lens side cover away from camera.

  8. Remove the Phillips #00 screw from the tape transport slider.
    • Remove the Phillips #00 screw from the tape transport slider.

  9. Remove the four (4) Phillips #00 screws located on the top of the camera.
    • Remove the four (4) Phillips #00 screws located on the top of the camera.

  10. Remove the electrical connector from camera.
    • Remove the electrical connector from camera.

  11. The tape transport unit is now free from the camera.
    • The tape transport unit is now free from the camera.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Emma

于2011年10月06日注册

47 信誉积分

创作了4篇指南

团队

UW Stout, Team 1-4, Zhou Fall 2011 UW Stout, Team 1-4, Zhou Fall 2011 的会员

UWSTOUT-ZHOU-F11S1G4

5 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 17

总计 2,534