简介

In order to keep your device in working order, the tape transport unit may need to be replaced.

配件

无需配件。

Remove the eight (8) Phillips #00 screws. There are six (6) screws on the bottom of the camera and two (2) screws beneath the back light button.
  • Remove the eight (8) Phillips #00 screws. There are six (6) screws on the bottom of the camera and two (2) screws beneath the back light button.

添加评论

Remove the five (5) Phillips #00 cassette side screws.
  • Remove the five (5) Phillips #00 cassette side screws.

添加评论

  • Remove the three (3) Phillips #00 screws located on the top of the lens side cover.

添加评论

  • Remove the Phillips #00 screw holding the microphone on.

添加评论

  • Remove the two (2) Phillips #00 screws from lens side cover.

添加评论

  • Slide the lens side cover away from camera.

添加评论

  • Remove the Phillips #00 screw from the tape transport slider.

添加评论

  • Remove the four (4) Phillips #00 screws located on the top of the camera.

添加评论

  • Remove the electrical connector from camera.

添加评论

  • The tape transport unit is now free from the camera.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Emma

于2011年10月06日注册

47 信誉积分

创作了4篇指南

团队

UW Stout, Team 1-4, Zhou Fall 2011 UW Stout, Team 1-4, Zhou Fall 2011 的会员

UWSTOUT-ZHOU-F11S1G4

5 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 5

过去的30天: 15

总计 2,292