简介

This guide shows how to remove the phone keypad.

  1. Remove the back cover and the battery.
    • Remove the back cover and the battery.

    添加评论

  2. Remove the 4 screws using a T6 precision screwdriver.
    • Remove the 4 screws using a T6 precision screwdriver.

    • Flip open the phone, and keep the back cover facing you.

    添加评论

    • Take the plastic opening tool and run it between the phone case and phone body to loosen the key pad while the phone is open.

    • Note: There are 2 clamps that lock it to the phone case (1 on each side).

    添加评论

    • Flip the phone over and lift straight up on the key pad to remove it.

    • Be sure to hold the phone flat (parallel to the table), because there are loose parts that may fall out.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Jory Benitez

于2010年04月16日注册

1 信誉积分

撰写一个指南

团队

Cal Poly, Team 7-12, Maness Spring 2010 Cal Poly, Team 7-12, Maness Spring 2010 的会员

CPSU-MANESS-S10S7G12

4 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 2,585