跳转到主内容

简介

Please note: you must remove the screws from the back casing before beginning this guide.

  1. Remove 4 screws from battery chamber
    • Remove 4 screws from battery chamber

    • Red - Phillips 0 screwdriver

    • Blue - Torx 6 screwdriver

  2. Gently pry off back casing
    • Gently pry off back casing

    • Note: work shim or flathead screwdriver around entire seam before attempting to pull off casing. This will reduce the chance of cracking the casing.

  3. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  4. Remove casing to expose camera components
    • Remove casing to expose camera components

  5. Gently pry open front casing by working a small shim or flathead screwdriver along the entire seam
    • Gently pry open front casing by working a small shim or flathead screwdriver along the entire seam

  6. Remove front casing by gently lifting it from the phone
    • Remove front casing by gently lifting it from the phone

    • Be careful not to pull off any other delicate pieces

  7. Keypad should be easy to remove Caution: LCD screen is very fragile. Be careful not to catch the keypad on it while removing.
    • Keypad should be easy to remove

    • Caution: LCD screen is very fragile. Be careful not to catch the keypad on it while removing.

结论

To reassemble your device, follow these instructions in reverse order.

Abby Evers

于2011年10月04日注册

196 信誉积分

创作了6篇指南

团队

UW Stout, Team 1-6, Zhou Fall 2011 UW Stout, Team 1-6, Zhou Fall 2011 的会员

UWSTOUT-ZHOU-F11S1G6

4 名成员

创作了12篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 2

过去的30天: 3

总计 3,013