简介

This guide will show the user how to disassemble a Sony Ericsson J22Oi with the intent of removing and replacing the charging port.

配件

无需配件。

  1. Before disassembling the phone, make sure the phone is powered off.
    • Before disassembling the phone, make sure the phone is powered off.

  2. Flip to the back of the phone and locate the black button on the top of the phone.
    • Flip to the back of the phone and locate the black button on the top of the phone.

    • Firmly hold down the black button on the top of the phone and gently snap off the back cover.

    • Remove the battery by wedging it out from the back.

    • Flip to the front of the phone and apply pressure to the front frame of the phone. The frame should snap off easily.

    • Remove the keypad by gently pulling it from the front of the phone.

    • Locate the five screws indicated on the phone.

    • Use a T5 Screwdriver and unscrew the five screws.

    • Once the screws are off, there should be a plastic cover on top of your screen. Gently slide the plastic cover off.

    • Now gently pull metal cover off.

    • You should now see the screen on the front side of the phone. Wedge your finger to the side of the phone. Apply some force to pop out the screen.

    • Now that screen is removed, replace the old screen with the new screen.

    • Reassemble the device by doing the steps in reverse order.

    • After removing the screen, you will find the charging port located at the bottom of the phone.

    • Gently slide off the charging port.

结论

To reassemble your device, follow these instructions in reverse order.

James Au

于2012年10月06日注册

10 信誉积分

创作了4篇指南

团队

Cal Poly, Team 6-36, Regan Fall 2012 Cal Poly, Team 6-36, Regan Fall 2012 的会员

CPSU-REGAN-F12S6G36

3 名成员

创作了10篇指南

Nice information for me , I also repairing the mobile phone

Mohit - 回复

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 1,115