跳转到主内容

Sony DCR-DVD 108 LCD Screen Replacement

你所需要的

  1. Sony DCR-DVD 108 LCD Screen Replacement, LCD Screen: 步骤 1 中的图像 1,1
    • Remove the front facing screw adjacent to the LCD screen using a J1 Phillips screwdriver. The screw is 2.8 mm in length.

  2. Sony DCR-DVD 108 LCD Screen Replacement: 步骤 2 中的图像 1,1
    • Rotate the camera screen until the screw on the bottom is clearly visible, then unscrew with a Phillips #1 screwdriver. This screw is 2.8mm in length.

  3. Sony DCR-DVD 108 LCD Screen Replacement: 步骤 3 中的图像 1,1
    • Rotate camera again to find #1 Phillips head screw, the screw length is about 2.8 mm long. A J1 screwdriver is advised.

  4. Sony DCR-DVD 108 LCD Screen Replacement: 步骤 4 中的图像 1,1
    在这个步骤中使用的工具:
    Tweezers
    $4.99
    购买
    • Slowly pry apart the covers using a plastic spudger.

    • Be sure to disconnect the ZIF connector holding the ribbon cable in place. To do this, use a spudger to flip the black tab up, and pull the cable out with tweezers.

    • This photo shows a torn ribbon cable. Be sure to disconnect the ribbon cable before fully removing the LCD cover, to avoid damage to the device.

结论

To reassemble your device, follow these instructions in reverse order.

Elijah DeWolf

于02/09/16注册

577 声望

创作了5篇指南

团队

USF Tampa, Team 7-6, Cheng Spring 2016 USF Tampa, Team 7-6, Cheng Spring 2016 的会员

USFT-CHENG-S16S7G6

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 8

过去 30 天: 15

总计 648