跳转到主内容

Sony Cyber-shot DSC-WX350 Motherboard Replacement

你所需要的

  1. Sony Cyber-shot DSC-WX350 Motherboard Replacement, Motherboard: 步骤 1 中的图像 1,3 Sony Cyber-shot DSC-WX350 Motherboard Replacement, Motherboard: 步骤 1 中的图像 2,3 Sony Cyber-shot DSC-WX350 Motherboard Replacement, Motherboard: 步骤 1 中的图像 3,3
    • Remove 6 Phillips 4mm screws from the bottom and sides of the device.

    • Remove the 1 Phillips 4mm screw from under the battery cover.

  2. Sony Cyber-shot DSC-WX350 Motherboard Replacement: 步骤 2 中的图像 1,1
    • Insert the plastic opening tool between the back cover and the bottom plate. Gently pry the cover off.

  3. Sony Cyber-shot DSC-WX350 Motherboard Replacement: 步骤 3 中的图像 1,2 Sony Cyber-shot DSC-WX350 Motherboard Replacement: 步骤 3 中的图像 2,2
    • Use your fingers to slide out the controller wheel board.

  4. Sony Cyber-shot DSC-WX350 Motherboard Replacement: 步骤 4 中的图像 1,1
    • On the left side of the camera, pull the LCD off the back plate.

    • There will be a ZIF connector by the control wheel, release the connector and remove the LCD.

  5. Sony Cyber-shot DSC-WX350 Motherboard Replacement: 步骤 5 中的图像 1,2 Sony Cyber-shot DSC-WX350 Motherboard Replacement: 步骤 5 中的图像 2,2
    • Once the LCD is off use the J00 screwdriver to take out the two 4mm silver screws. Once the screws are taken out pull off the piece with your fingers.

  6. Sony Cyber-shot DSC-WX350 Motherboard Replacement: 步骤 6 中的图像 1,1
    • Remove the three ZIFs connected to the motherboard. The top is found under a piece of tape.

  7. Sony Cyber-shot DSC-WX350 Motherboard Replacement: 步骤 7 中的图像 1,2 Sony Cyber-shot DSC-WX350 Motherboard Replacement: 步骤 7 中的图像 2,2
    • Remove the lens assembly and motherboard from the front of the case.

    • The lens assembly should separate when removing the front.

  8. Sony Cyber-shot DSC-WX350 Motherboard Replacement: 步骤 8 中的图像 1,3 Sony Cyber-shot DSC-WX350 Motherboard Replacement: 步骤 8 中的图像 2,3 Sony Cyber-shot DSC-WX350 Motherboard Replacement: 步骤 8 中的图像 3,3
    • On the backside of the motherboard, a silver clip is holding the motherboard to the plastic shell. Insert the plastic opening tool under the clip and pry gently until it releases.

结论

To reassemble your device, follow these instructions in reverse order.

Ryan Speitel

于05/22/17注册

101 声望

撰写一个指南

团队

IUPUI, Team S1-G1, Wilson Summer 2017 IUPUI, Team S1-G1, Wilson Summer 2017 的会员

IUPUI-WILSON-SU17S1G1

4 名成员

创作了3篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 3

过去 7 天: 10

过去 30 天: 21

总计 1,429