修复你的物品 社区 商店

Sony Cyber-shot DSC-WX100 LCD Screen Replacement

简介

The purpose of this guide is to replace the LCD screen. This guide will provide the necessary information to disassemble the camera, replace the screen, and to properly reassemble the components involved.

你所需要的

  1. Sony Cyber-shot DSC-WX100 LCD Screen Replacement, Battery: 步骤 1 中的图像 1，1

    • Open the flap indicated to allow access to the battery slot.

    • The gray switch indicated has to be moved to the right in order to release the flap.

    编辑

  2. Sony Cyber-shot DSC-WX100 LCD Screen Replacement: 步骤 2 中的图像 1，1

    • If the old battery is still in the slot, then make sure the camera is turned off prior to removal.

    • If there is a battery currently in the slot, remove by first pulling downwards on the blue component. This will allow you to remove the battery from the slot.

    编辑

  3. Sony Cyber-shot DSC-WX100 LCD Screen Replacement, Outer Casing: 步骤 3 中的图像 1，3 Sony Cyber-shot DSC-WX100 LCD Screen Replacement, Outer Casing: 步骤 3 中的图像 2，3 Sony Cyber-shot DSC-WX100 LCD Screen Replacement, Outer Casing: 步骤 3 中的图像 3，3

    • Remove all of the 1mm screws using a Philips #000 Screwdriver.

    • Remover the rest of the screws (2mm) from the camera covers using a Phillips #000 Screwdriver.

    编辑

  5. Sony Cyber-shot DSC-WX100 LCD Screen Replacement: 步骤 4 中的图像 1，2 Sony Cyber-shot DSC-WX100 LCD Screen Replacement: 步骤 4 中的图像 2，2

    • Use the plastic opening tool to gently remove the front and back plates of the camera.

    编辑

  6. Sony Cyber-shot DSC-WX100 LCD Screen Replacement: 步骤 5 中的图像 1，2 Sony Cyber-shot DSC-WX100 LCD Screen Replacement: 步骤 5 中的图像 2，2

    • Use a plastic opening tool to gently release the two indicated tabs.

    编辑

    • Pull up on the lower end of the plate. Lift it so the plate is high enough so that the marked bump is not holding it in place.

    • Pull away from the camera at the end of the metal plate with the blue circuits to then remove the plate from the rest of the camera.

    • For help please watch the video.

    编辑

  8. Sony Cyber-shot DSC-WX100 LCD Screen Replacement: 步骤 7 中的图像 1，3 Sony Cyber-shot DSC-WX100 LCD Screen Replacement: 步骤 7 中的图像 2，3 Sony Cyber-shot DSC-WX100 LCD Screen Replacement: 步骤 7 中的图像 3，3

    • Remove this screw (1mm) with a Phillips #000 Screwdriver.

    • Gently lift the LCD from the metal plate.

    • Remove the metal plate that was underneath the LCD screen from the camera.

    编辑

  9. Sony Cyber-shot DSC-WX100 LCD Screen Replacement: 步骤 8 中的图像 1，3 Sony Cyber-shot DSC-WX100 LCD Screen Replacement: 步骤 8 中的图像 2，3 Sony Cyber-shot DSC-WX100 LCD Screen Replacement: 步骤 8 中的图像 3，3

    • Use the plastic opening tool to pry the black bar upwards.

    • Pull the LCD screen from out of the slot.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与2其他贡献者

Peter Prins

于03/19/15注册

262 声望

创作了2篇指南

徽章: 10

+ 7更多徽章

团队

Michigan Tech, Team 1-9, Lauer Spring 2015 Michigan Tech, Team 1-9, Lauer Spring 2015 的会员

MTU-LAUER-S15S1G9

2 名成员

创作了6篇指南

一条评论

be careful with capacitor !!! i touched it 5-10 minutes after battery was removed and felt electricity in my chest, ears… be careful :D

k.bilius - 回复

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 4

过去 30 天： 7

总计 1,271