简介

Disassembling the back cover of the camera so that we can repair components from the inside.

Slide the battery cover in the direction the arrow points. Pull the battery cover towards you.
  • Slide the battery cover in the direction the arrow points.

  • Pull the battery cover towards you.

添加评论

Flick the blue switch for the battery to pop out. Remove the battery from the camera.
  • Flick the blue switch for the battery to pop out.

  • Remove the battery from the camera.

添加评论

Using the Phillips #00 Screwdriver, remove the two screws from the caution panel. Remove that panel.
  • Using the Phillips #00 Screwdriver, remove the two screws from the caution panel.

  • Remove that panel.

  • Careful for falling pieces.

添加评论

Remove the screw with a Phillips #00 Screwdriver from the right side of the camera (with '3x optical zoom' engraved on the side panel). Remove that panel.
  • Remove the screw with a Phillips #00 Screwdriver from the right side of the camera (with '3x optical zoom' engraved on the side panel).

  • Remove that panel.

添加评论

Remove the screw using the Phillips #00 Screwdriver from the bottom the camera, closest to the back cover.
  • Remove the screw using the Phillips #00 Screwdriver from the bottom the camera, closest to the back cover.

添加评论

Gently remove the back cover. It may be a bit stiff, so use some force to remove it. Proceed with caution.
  • Gently remove the back cover.

  • It may be a bit stiff, so use some force to remove it. Proceed with caution.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

kkfong91

于2010年10月11日注册

293 信誉积分

创作了2篇指南

团队

Cal Poly, Team 9-20, Regan Fall 2010 Cal Poly, Team 9-20, Regan Fall 2010 的会员

CPSU-REGAN-F10S9G20

5 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 10

总计 3,226