简介

This guide provides access to the LCD of the camera, which is necessary to remove for many other parts. Replacing the LCD is a common procedure for this camera.

  1. The battery cover is located on the right side of the camera.
    • The battery cover is located on the right side of the camera.

    • Slide the cover to expose the battery.

  2. Ensure that the battery lines up properly with the slot in the camera.
    • Ensure that the battery lines up properly with the slot in the camera.

    • Slide battery in.

    • Slide cover closed.

    • Battery not shown

  3. Remove screws from outside of camera. There are 6 screws total. 3 screws on underside. 1 screw on right side, near battery cover.
    • Remove screws from outside of camera. There are 6 screws total.

    • 3 screws on underside.

    • 1 screw on right side, near battery cover.

    • 2 screws on left side.

  4. Use screwdriver to remove screws.
    • Use screwdriver to remove screws.

  5. Gently pull the front cover off of the main camera.
    • Gently pull the front cover off of the main camera.

    • All of the inner parts of the camera are attached to the back screen.

  6. The front cover is now removed from the camera and the internal hardware is now exposed.
    • The front cover is now removed from the camera and the internal hardware is now exposed.

  7. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  8. This is the camera without the front cover.
    • This is the camera without the front cover.

  9. Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.
    • Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.

  10. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.
    • Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.

  11. Pull apart the inner hardware from the back case by prying on the left side. Pull apart the inner hardware from the back case by prying on the left side. Pull apart the inner hardware from the back case by prying on the left side.
    • Pull apart the inner hardware from the back case by prying on the left side.

  12. Remove the back cover.
    • Remove the back cover.

  13. The back cover is now removed from the internal hardware.
    • The back cover is now removed from the internal hardware.

  14. Use the spudger to pry the LCD from the camera.
    • Use the spudger to pry the LCD from the camera.

  15. The LCD is now removed from the camera, although attached by a ribbon at the bottom of the camera.
    • The LCD is now removed from the camera, although attached by a ribbon at the bottom of the camera.

  16. Flip camera to other side. Use tweezers to peel off black sticker, located in middle of the motherboard.
    • Flip camera to other side.

    • Use tweezers to peel off black sticker, located in middle of the motherboard.

  17. Use pry stick to pop out LCD connector ribbon, also called the ZIF connector. Use pry stick to pop out LCD connector ribbon, also called the ZIF connector.
    • Use pry stick to pop out LCD connector ribbon, also called the ZIF connector.

  18. The LCD is now removed from the camera.
    • The LCD is now removed from the camera.

结论

To reassemble your device, follow these instructions in reverse order.

Stephannie Allen

于2013年03月11日注册

189 信誉积分

创作了10篇指南

团队

Clemson, Team 13-1, Benson Spring 2013 Clemson, Team 13-1, Benson Spring 2013 的会员

CLEM-BENSON-S13S13G1

4 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 6

总计 649