简介

This guide will allow the user to remove the front cover of the camera, necessary for most other steps.

配件

无需配件。

  1. The battery cover is located on the right side of the camera.
    • The battery cover is located on the right side of the camera.

    • Slide the cover to expose the battery.

    添加评论

  2. Ensure that the battery lines up properly with the slot in the camera.
    • Ensure that the battery lines up properly with the slot in the camera.

    • Slide battery in.

    • Slide cover closed.

    • Battery not shown

    添加评论

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove screws from outside of camera. There are 6 screws total.

    • 3 screws on underside.

    • 1 screw on right side, near battery cover.

    • 2 screws on left side.

    添加评论

    • Use screwdriver to remove screws.

    添加评论

    • Gently pull the front cover off of the main camera.

    • All of the inner parts of the camera are attached to the back screen.

    添加评论

    • The front cover is now removed from the camera and the internal hardware is now exposed.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Stephannie Allen

于2013年03月11日注册

189 信誉积分

创作了10篇指南

团队

Clemson, Team 13-1, Benson Spring 2013 Clemson, Team 13-1, Benson Spring 2013 的会员

CLEM-BENSON-S13S13G1

4 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 247