简介

Here is a straight forward repair of broken LCD. The repair should take no longer than 15 minutes. Replacement LCD's are available for under USD $20.

  1. The broken LCD is immediately visible when the camera is turned on.
    • The broken LCD is immediately visible when the camera is turned on.

    • Remove the batteries and, if so equipped, the memory card.

    • Remove the three Philips screws from the bottom of the camera with a Phillips #00 Screwdriver.

    添加评论

  2. Remove the two Philips screws from the right side of the camera.
    • Remove the two Philips screws from the right side of the camera.

    • Remove the two Philips screws from the left side of the camera.

    • Split the housing by either using a plastic opening tool, or your finger nails. No excessive force is necessary. For ease of accomplishment, start at the battery compartment.

    添加评论

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Once the rear case has been removed, the LCD and frame are easily identified.

    • Fold the LCD to the right, away from the frame.

    • Do not try to remove the LCD yet since the ribbon cable is still connected.

    • Remove the three Philips screws from the LCD frame.

    添加评论

    • When the LCD frame is removed, the ribbon cable becomes clearly visible.

    • Flip the LCD to its left side. Open the clip of the connector by moving the black lock to the right.

    • Remove the LCD

    添加评论

    • Ensure the screen displayed greets you, once you reassembled your camera

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

oldturkey03

于2010年09月29日注册

548,459 信誉积分

创作了101篇指南

团队

OTS OTS 的会员

Business

1 名成员

创作了122篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 6

总计 1,728