修复你的物品 社区 商店

Sony Cyber-shot DSC-P9 Flash Replacement

你所需要的

  1. Sony Cyber-shot DSC-P9 Flash Replacement, Battery: 步骤 1 中的图像 1，1

    • Slide the battery latch down the side of the camera with your hands.

    • The latch will automatically pop open.

    编辑

  2. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 2 中的图像 1，1

    • Unlatch the clip over the battery.

    • The battery will partially pop out.

    编辑

  3. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 3 中的图像 1，2 Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 3 中的图像 2，2

    • Remove the battery from the camera.

    编辑

  4. Sony Cyber-shot DSC-P9 Flash Replacement, Outer Casing: 步骤 4 中的图像 1，2 Sony Cyber-shot DSC-P9 Flash Replacement, Outer Casing: 步骤 4 中的图像 2，2

    • Remove the four 3.0mm Phillips #000 screws on the top of the camera with the phillips screwdriver.

    • Remove the additional four 3.0mm Phillips #000 screws on the bottom of the camera.

    编辑

  5. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 5 中的图像 1，2 Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 5 中的图像 2，2

    • Once the screws are removed, slowly remove the back casing from the rest of the camera.

    编辑

  6. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 6 中的图像 1，2 Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 6 中的图像 2，2

    • Then, pull the front case away from the rest of the camera.

    编辑

  7. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 7 中的图像 1，1

    • After the casing is removed, the camera should look as shown.

    编辑

  9. Sony Cyber-shot DSC-P9 Flash Replacement, Lens: 步骤 8 中的图像 1，2 Sony Cyber-shot DSC-P9 Flash Replacement, Lens: 步骤 8 中的图像 2，2

    • Dislodge the round casing from the lens.

    • Pull it away from the rest of the camera.

    编辑

  10. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 9 中的图像 1，1

    • Unscrew the two 4.0mm Phillips #000 screws from the display.

    编辑

  11. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 10 中的图像 1，1

    • Pull the two ribbon cables out of their slots on the back circuit board.

    编辑

  12. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 11 中的图像 1，1

    • Remove the three 4.0mm Phillips #000 screws holding the back panel in place.

    编辑

  13. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 12 中的图像 1，3 Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 12 中的图像 2，3 Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 12 中的图像 3，3

    • Work the back panel out from under the small grey clip.

    • Slide the back panel off of the camera by dislodging it from the remaining clips.

    • Below is a flat, orange cable connecting the lens to the motherboard.

    • Be careful not to bend the back plate during this process.

    编辑

  14. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 13 中的图像 1，1

    • Turn the camera over so that you can see the front of the lens.

    • Two connectors link the lens to the motherboard.

    • Gently bring the lens away from the camera.

    编辑

  15. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 14 中的图像 1，1

    • Using the flat end of the plastic spudger tool, flip up the black tabs on the connectors.

    • Be careful not to exert too much force, as the connectors are delicate.

    编辑

  16. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 15 中的图像 1，3 Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 15 中的图像 2，3 Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 15 中的图像 3，3

    • Gently pull out the cables and move the lens away from the rest of the camera.

    • You should now have two distinct, separate components.

    编辑

  17. Sony Cyber-shot DSC-P9 Flash Replacement, Flash: 步骤 16 中的图像 1，1

    • Remove the 3.0mm Phillips #000 screw at the top of the battery door.

    编辑

  18. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 17 中的图像 1，2 Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 17 中的图像 2，2

    • Pull off the top button piece. You will have to detach a small blue ribbon cable.

    编辑

  19. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 18 中的图像 1，2 Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 18 中的图像 2，2

    • Caution: the capacitor, a black cylinder near the top of the camera, might have a charge in it, which could be harmful to you or the camera. Neutralize it by touching both wires with a screwdriver at the same time.

    编辑

  20. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 19 中的图像 1，3 Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 19 中的图像 2，3 Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 19 中的图像 3，3

    • Remove the flash mechanism. It is held in place by a clip on the side of the camera.

    • The capacitor and flash will rotate out, still attached by a ribbon cable on the left.

    编辑

  21. Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 20 中的图像 1，2 Sony Cyber-shot DSC-P9 Flash Replacement: 步骤 20 中的图像 2，2

    • Lift up the black tab with the spudger.

    • Gently remove the ribbon cable from the rest of the camera.

    • The flash component is now completely separate from the rest of the camera.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

Andrew Forster

于04/16/12注册

12 声望

创作了2篇指南

徽章: 7

+ 4更多徽章

团队

Cal Poly, Team 17-25, Amido Spring 2012 Cal Poly, Team 17-25, Amido Spring 2012 的会员

CPSU-AMIDO-S12S17G25

4 名成员

创作了14篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 2

总计 698