本指南有最近更改,您可查看未经巡查的最新版本。
简介
The camera will need to be completely disassembled to get to the flash, so only do this as as a last resort.
你所需要的
-
-
Open the battery compartment and remove the batteries.
-
Remove all of the visible screws on the outside of the case.
-
-
-
-
Remove all six screws on the front side of the motherboard circled in the picture.
-
Pull the motherboard from the rest of the housing.
-
-
-
Discharge the yellow capacitor attached to the flash unit by shorting the leads with a screw driver.
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.