简介

This is a step-by-step guide to disassembling and replacing the flash in the Sony Cyber-shot camera.

First locate the appropriate screws for detachment.
  • First locate the appropriate screws for detachment.

添加评论

Remove the five screws shown using a Phillips #00 Screwdriver.
  • Remove the five screws shown using a Phillips #00 Screwdriver.

  • It is important to put the small screws in a safe location in order to reassemble the casing.

添加评论

  • Using a spudger, carefully pry open the front casing.

添加评论

  • Carefully separate the front casing from the camera body.

  • CAUTION: Be careful not to break the wire connecting the front casing and the camera.

添加评论

  • Using tweezers, gently pull the ribbon trace out of its housing found on the left side of the flash.

添加评论

  • Using a spudger, pry the small latch between the lens and the flash open to release the flash.

  • Pull the flash away from the camera.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Katie McCraw

于2012年03月09日注册

191 信誉积分

创作了7篇指南

团队

Clemson, Team 1-5, Benson Spring 2012 Clemson, Team 1-5, Benson Spring 2012 的会员

CLEM-BENSON-S12S1G5

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 7

过去的30天: 14

总计 1,955