Sony Cyber-shot DSC-H300 Rear Case Replacement

简介

This guide shows a step by step process on how to replace the rear case of the camera. You must be careful during this guide due to certain parts being very vulnerable to breaking. If the case isn't staying in position or the buttons are unresponsive take a look at our troubleshooting guide for more help.

你所需要的

步骤 1 Removing screws

Sony Cyber-shot DSC-H300 Rear Case Replacement, Removing screws: 步骤 1 中的图像 1，2

Sony Cyber-shot DSC-H300 Rear Case Replacement, Removing screws: 步骤 1 中的图像 2，2

Remove the four 6mm Phillips #00 screws.

编辑

步骤 2 Removing screws

Sony Cyber-shot DSC-H300 Rear Case Replacement, Removing screws: 步骤 2 中的图像 1，2

Sony Cyber-shot DSC-H300 Rear Case Replacement, Removing screws: 步骤 2 中的图像 2，2

Remove the two 6mm Phillips #00 screws.
Remove the two 3mm Phillips #00 screws.

编辑

步骤 3

Sony Cyber-shot DSC-H300 Rear Case Replacement: 步骤 3 中的图像 3，3

Use the flat end of a plastic spudger to pry apart the rear cover from the body of the camera.
Be careful not to damage the three plastic clips securing the top edge of the rear cover.

编辑