简介
In order to reach the flash capacitor, you have to remove the front and back panel, the button board and the top cover of the device. Be very careful when you remove these parts.
你所需要的
-
-
-
Remove the six 3.5mm Phillips #000 screws.
-
Rotate the lock away from the camera.
-
-
-
Lift the capacitor from the assembly.
-
Disconnect the no-fuss ribbon cable by gently pulling it out of the flash board.
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.