跳转到主内容

简介

Rear Cover Removal allows the inside of the Clie to be exposed for further replacement of internal components

配件

没有特定配件。

  1. Tools needed:
    • Tools needed:

    • Tweezers

    • Philips Screwdriver

  2. Using Phillips screwdriver, remove 4 screws from the rear cover. Remove 1 screw from the right side. Remove 1 screw from the top
    • Using Phillips screwdriver, remove 4 screws from the rear cover.

    • Remove 1 screw from the right side.

    • Remove 1 screw from the top

  3. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  4. Gently pry rear cover to remove USB port cover and Hold Switch. Gently pry rear cover to remove USB port cover and Hold Switch.
    • Gently pry rear cover to remove USB port cover and Hold Switch.

  5. Remove side cover. Gently pull the rear cover to separate from device.
    • Remove side cover.

    • Gently pull the rear cover to separate from device.

  6. Slowly pull rear cover from device being careful not to pull the speaker connection wire.
    • Slowly pull rear cover from device being careful not to pull the speaker connection wire.

    • Remove speaker wire from device.

    • The rear cover is now separated from the device.

结论

To reassemble your device, follow these instructions in reverse order.

Christopher M Garcia

于2011年04月28日注册

11 信誉积分

撰写一个指南

团队

CSU Los Angeles, Team 1-4, Nelson Spring 2011 CSU Los Angeles, Team 1-4, Nelson Spring 2011 的会员

CSULA-NELSON-S11S1G4

5 名成员

创作了2篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 8

总计 3,418