Sony Clie PEG-T615C Battery Replacement

简介

This article will teach the user how to remove an old battery from a Sony Clie PEG-T615C with short and easy-to-follow steps.

你所需要的

步骤 1 Battery

Sony Clie PEG-T615C Battery Replacement, Battery: 步骤 1 中的图像 1，1

Remove two screws from the thumb dial panel on the back of the device.

编辑

步骤 2

Remove one screw from the upper right corner on the back of the device.

编辑

步骤 3

Remove one screw from the thumb dial panel on the right side of the device.

编辑

步骤 4

Remove one screw from lower right side of the device.

编辑

步骤 5

Remove one screw from the lower left side of the device.

编辑

步骤 6

Remove two screws from the bottom of the device.

编辑

步骤 7

Remove the thumb dial panel by sliding it away from the device.
You can do this step earlier, after you remove all of the screws from the thumb drive panel.

编辑

步骤 8

Remove the back panel, exposing the inside of the device.

编辑

步骤 9

Remove one screw located on the board below the battery.

编辑

步骤 10

Unplug the male battery plug on the battery wire from the female battery plug on the board.

编辑

步骤 11

Remove the battery by sliding it out of the side of the device.

编辑

结论

To reassemble your device, follow these instructions in reverse order.

作者

与8其他贡献者

Rob

于10/04/11注册

1 声望

创作了2篇指南

徽章: 1

团队

UW Stout, Team 5-6, Zhou Fall 2011 UW Stout, Team 5-6, Zhou Fall 2011 的会员

UWSTOUT-ZHOU-F11S5G6

4 名成员

创作了2篇指南

Sony Clie PEG-T615C Battery Replacement

简介

你所需要的

步骤 1 Battery

添加评论

步骤 2

添加评论

步骤 3

添加评论

步骤 4

添加评论

步骤 5

添加评论

步骤 6

添加评论

步骤 7

添加评论

步骤 8

添加评论

步骤 9

添加评论

步骤 10

添加评论

步骤 11

添加评论

作者

Rob

团队

UW Stout, Team 5-6, Zhou Fall 2011 UW Stout, Team 5-6, Zhou Fall 2011 的会员

0条评论

添加评论

嵌入本指南

预览