修复你的物品 社区 商店

Sony CPF-IP001 Subwoofer Replacement

简介

This guide will show you how to replace the subwoofer speaker if you hear muffled or distorted sound coming from the subwoofer unit.

你所需要的

  1. Sony CPF-IP001 Subwoofer Replacement, Subwoofer Housing Disassembly: 步骤 1 中的图像 1，2 Sony CPF-IP001 Subwoofer Replacement, Subwoofer Housing Disassembly: 步骤 1 中的图像 2，2

    • Remove fourteen 8 mm Phillips #2 screws from the bottom of the subwoofer.

    • Once all of the screws are removed, the cover can be taken off using a metal spudger.

    编辑

  2. Sony CPF-IP001 Subwoofer Replacement: 步骤 2 中的图像 1，2 Sony CPF-IP001 Subwoofer Replacement: 步骤 2 中的图像 2，2

    • Remove eight 14 mm Phillips #2 screws holding the circuit board in place.

    • Using the plastic opening tool, carefully remove the circuit board.

    • There will be 3 wires connected to the opposite side of the circuit board. Be careful not to pull the board out of the device too far and damage these wires.

    编辑

  3. Sony CPF-IP001 Subwoofer Replacement: 步骤 3 中的图像 1，2 Sony CPF-IP001 Subwoofer Replacement: 步骤 3 中的图像 2，2

    • Remove the first of the three wires by squeezing the clip and pulling it out.

    • After disconnecting the first wire, the two attached wires can be more easily accessed.

    编辑

  4. Sony CPF-IP001 Subwoofer Replacement: 步骤 4 中的图像 1，3 Sony CPF-IP001 Subwoofer Replacement: 步骤 4 中的图像 2，3 Sony CPF-IP001 Subwoofer Replacement: 步骤 4 中的图像 3，3

    • Remove the wire furthest to the left by squeezing the clip and pulling it out.

    • Detach the third wire by carefully using the tweezers.

    • The circuit board is now completely detached and can be set aside.

    编辑

  6. Sony CPF-IP001 Subwoofer Replacement: 步骤 5 中的图像 1，2 Sony CPF-IP001 Subwoofer Replacement: 步骤 5 中的图像 2，2

    • Remove six 8 mm Phillips #2 screws.

    • Slide the side panel with the power cord out from the housing.

    • The side panel with the power cord will come out as a whole unit with the subwoofer air tunnel.

    编辑

  7. Sony CPF-IP001 Subwoofer Replacement, Subwoofer: 步骤 6 中的图像 1，1

    • Remove two 8 mm Phillips #2 screws holding the side panel in place.

    编辑

  8. Sony CPF-IP001 Subwoofer Replacement: 步骤 7 中的图像 1，1

    • Remove eight 8 mm Phillips #2 screws holding the subwoofer tray to the housing.

    编辑

  9. Sony CPF-IP001 Subwoofer Replacement: 步骤 8 中的图像 1，2 Sony CPF-IP001 Subwoofer Replacement: 步骤 8 中的图像 2，2

    • Using a metal spudger, slightly peel back the plastic the has been glued to the tray and the housing.

    • Slide the tray containing the subwoofer out of the housing.

    编辑

  10. Sony CPF-IP001 Subwoofer Replacement: 步骤 9 中的图像 1，2 Sony CPF-IP001 Subwoofer Replacement: 步骤 9 中的图像 2，2

    • After removing the tray, flip it over and you will find four screws connecting the subwoofer.

    • Remove four 7.5 mm Phillips #2 screws.

    编辑

  11. Sony CPF-IP001 Subwoofer Replacement: 步骤 10 中的图像 1，2 Sony CPF-IP001 Subwoofer Replacement: 步骤 10 中的图像 2，2

    • The subwoofer has now been removed from the device and can be replaced.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与4其他贡献者

Mike Bolton

于04/14/15注册

473 声望

创作了4篇指南

徽章: 8

+ 5更多徽章

团队

Cal Poly, Team 6-14, Maness Spring 2015 Cal Poly, Team 6-14, Maness Spring 2015 的会员

CPSU-MANESS-S15S6G14

4 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 4

总计 721