跳转到主内容

简介

This is a guide to show how to remove and replace the wiring harness from the stereo. The wiring harness is how the device is connected to the vehicle deck.

Before any repair work can be done one must remove the device for the vehicle. To do so follow this link to see a general vehicle removal of a stereo system.

  1. Locate the clip on the wiring harness.
    • Locate the clip on the wiring harness.

  2. Press down on the clip like you would an Ethernet cable. Rock harness side to side, pulling gently towards you until harness detaches.
    • Press down on the clip like you would an Ethernet cable.

    • Rock harness side to side, pulling gently towards you until harness detaches.

结论

To reassemble your device, follow these instructions in reverse order.

Odelkys Marquez

于2014年09月22日注册

1,046 信誉积分

创作了7篇指南

团队

USF Tampa, Team 10-2, Brown Fall 2014 USF Tampa, Team 10-2, Brown Fall 2014 的会员

USFT-BROWN-F14S10G2

3 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 3

过去的30天: 15

总计 1,880