Sony Bloggie 3D Player On/Off Buttons Replacement

简介

We turn our devices on and off every single day, and as such, the buttons wear over time. This repair guide will focus on replacing the electrical components controlling the On/Off buttons.

你所需要的

步骤 1 Front Cover

Sony Bloggie 3D Player On/Off Buttons Replacement, Front Cover: 步骤 1 中的图像 1，1

Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.

翻译

步骤 2

Use a plastic opening tool to pry the cover open.
After the the cover is partly open as shown, remove the cover with your hands.

翻译

步骤 3 Back Cover

Sony Bloggie 3D Player On/Off Buttons Replacement, Back Cover: 步骤 3 中的图像 1，2

Sony Bloggie 3D Player On/Off Buttons Replacement, Back Cover: 步骤 3 中的图像 2，2

Using your hand, or a pair of tweezers, remove the ZIF connector by gently pulling it out of the dock on the circuit board.

翻译

步骤 4

Use a plastic opening tool to loosen the back cover off the device.
Once the back cover is loose, remove it gently by hand.

翻译

步骤 5 On/Off Buttons

Sony Bloggie 3D Player On/Off Buttons Replacement, On/Off Buttons: 步骤 5 中的图像 1，1

Using a spudger, carefully remove the metal casing that is attached to the ZIF connector.

翻译

步骤 6

Unclip the two plastic buttons with the spudger tool.
The buttons each have a spring under them that will fall off, be careful not to lose them.

翻译

结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Fred Saucedo

于01/11/13注册

3 声望

撰写一个指南

徽章: 3

团队

Cal Poly, Team 7-12, Maness Winter 2013 Cal Poly, Team 7-12, Maness Winter 2013 的会员

CPSU-MANESS-W13S7G12

5 名成员

创作了12篇指南

Sony Bloggie 3D Player On/Off Buttons Replacement

简介

你所需要的

步骤 1 Front Cover

添加评论

步骤 2

添加评论

步骤 3 Back Cover

添加评论

步骤 4

添加评论

步骤 5 On/Off Buttons

添加评论

步骤 6

添加评论

作者

Fred Saucedo

团队

Cal Poly, Team 7-12, Maness Winter 2013 Cal Poly, Team 7-12, Maness Winter 2013 的会员

0条评论

添加评论

嵌入本指南

预览