Sony Bloggie 3D Player Back Cover Replacement - iFixit 维修指南

本指南有最近更改，您可查看未经巡查的最新版本。

简介

This guide will detail the steps necessary to remove the back cover of the Sony Bloggie 3D Player.

你所需要的

步骤 1 Front Cover

Sony Bloggie 3D Player Back Cover Replacement, Front Cover: 步骤 1 中的图像 1，1

Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.

步骤 2

Sony Bloggie 3D Player Back Cover Replacement: 步骤 2 中的图像 1，2

Sony Bloggie 3D Player Back Cover Replacement: 步骤 2 中的图像 2，2

Use a plastic opening tool to pry the cover open.
After the the cover is partly open as shown, remove the cover with your hands.

步骤 3 Back Cover

Sony Bloggie 3D Player Back Cover Replacement, Back Cover: 步骤 3 中的图像 1，2

Sony Bloggie 3D Player Back Cover Replacement, Back Cover: 步骤 3 中的图像 2，2

Using your hand, or a pair of tweezers, remove the ZIF connector by gently pulling it out of the dock on the circuit board.

步骤 4

Sony Bloggie 3D Player Back Cover Replacement: 步骤 4 中的图像 1，2

Sony Bloggie 3D Player Back Cover Replacement: 步骤 4 中的图像 2，2

Use a plastic opening tool to loosen the back cover off the device.
Once the back cover is loose, remove it gently by hand.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与6其他贡献者

Timothy Tran

于01/30/13注册

1 声望

创作了2篇指南

团队

Cal Poly, Team 7-12, Maness Winter 2013 Cal Poly, Team 7-12, Maness Winter 2013 的会员

CPSU-MANESS-W13S7G12

5 名成员

创作了12篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 381