修复你的物品 社区 商店

Snowboard Binding Replacement

简介

Snowboard bindings are easy to take apart and replace. In this guide we will show you how to replace a Union Force binding. Most snowboard bindings are very similar to remove, but there may be some slight differences.

你所需要的

  1. Snowboard Binding Replacement, Binding: 步骤 1 中的图像 1，3 Snowboard Binding Replacement, Binding: 步骤 1 中的图像 2，3 Snowboard Binding Replacement, Binding: 步骤 1 中的图像 3，3

    • Release the binding straps by lifting up on the buckle and pulling towards the direction of the end of the ladder.

    • Not all binding straps will release the same way. If you are having trouble releasing your binding straps, please refer to your owner's manual.

    编辑

  2. Snowboard Binding Replacement: 步骤 2 中的图像 1，2 Snowboard Binding Replacement: 步骤 2 中的图像 2，2

    • Move the straps and the highback plate out of the way in order to have clear access to the foot pad screw.

    • The highback plate is the vertical support plate located on the heel side of the binding.

    编辑

  4. Snowboard Binding Replacement: 步骤 3 中的图像 1，2 Snowboard Binding Replacement: 步骤 3 中的图像 2，2

    • Use a #2 Phillips screwdriver to remove the panhead, 10mm wide, M4 x 12mm screw located in the middle of the foot pad.

    编辑

  5. Snowboard Binding Replacement: 步骤 4 中的图像 1，3 Snowboard Binding Replacement: 步骤 4 中的图像 2，3 Snowboard Binding Replacement: 步骤 4 中的图像 3，3

    • Use a #2 Phillips screwdriver to remove the four ovalhead M6 x 12mm screws that attach the base plate of the binding to the board.

    • Lift or slide the binding off the board and set the screws aside.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与4其他贡献者

Loren Sunding

于01/14/14注册

118 声望

撰写一个指南

徽章: 11

+ 8更多徽章

团队

Cal Poly, Team 17-4, Forte Winter 2014 Cal Poly, Team 17-4, Forte Winter 2014 的会员

CPSU-FORTE-W14S17G4

5 名成员

创作了9篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 9

过去 30 天： 96

总计 13,379