跳转到主内容

Smartab STJR700 Speakers Replacement

你所需要的

  1. Smartab STJR700 Speakers Replacement, Speakers: 步骤 1 中的图像 1,3 Smartab STJR700 Speakers Replacement, Speakers: 步骤 1 中的图像 2,3 Smartab STJR700 Speakers Replacement, Speakers: 步骤 1 中的图像 3,3
    • Power off device. Place it face down. Unscrew the 4 perimeter screws, using a PH000 screwdriver from iFixit kit

  2. Smartab STJR700 Speakers Replacement: 步骤 2 中的图像 1,1
    • Using a plastic opening tool or metal spudger, begin to gently pry the rear case down and away from the display.Slowly wiggle the tool up and down to pry open the tablet.Once the rear case is fully removed place it to the side.

  3. Smartab STJR700 Speakers Replacement: 步骤 3 中的图像 1,3 Smartab STJR700 Speakers Replacement: 步骤 3 中的图像 2,3 Smartab STJR700 Speakers Replacement: 步骤 3 中的图像 3,3
    • Using tweezers carefully remove tape that is holding the black and red intertwined cables to the motherboard. Place tape to the side as is will be needed for reassembly.

  4. Smartab STJR700 Speakers Replacement: 步骤 4 中的图像 1,1
    • Remove the 2 screws holding the speaker to the front panel. Use a PH000 screwdriver from iFixit kit. Place the screws to the side as they will be needed for reassembly.

  5. Smartab STJR700 Speakers Replacement: 步骤 5 中的图像 1,1
    • Use the metal spudger to remove the speaker from the front panel of the tablet.

  6. Smartab STJR700 Speakers Replacement: 步骤 6 中的图像 1,1
    • Disconnect black and red intertwined wire from the motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

Moriah Wiggins

于03/08/17注册

201 声望

创作了2篇指南

团队

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 179