Smartab STJR700 Screen/Digitizer Replacement - iFixit 维修指南

你所需要的

步骤 1 Screen/Digitizer

Smartab STJR700 Screen/Digitizer Replacement, Screen/Digitizer: 步骤 1 中的图像 1，2

Smartab STJR700 Screen/Digitizer Replacement, Screen/Digitizer: 步骤 1 中的图像 2，2

There are four screws with each one in each corner. Use the screwdriver to unscrew the back or bottom of the device.

步骤 2

Smartab STJR700 Screen/Digitizer Replacement: 步骤 2 中的图像 1，1

Remove the bottom or back of the device by detaching the black bottom after removing the screws.
the front panel should now be exposing the digitizer along with the other electronic components of the device.

步骤 3

Smartab STJR700 Screen/Digitizer Replacement: 步骤 3 中的图像 1，2

Smartab STJR700 Screen/Digitizer Replacement: 步骤 3 中的图像 2，2

Next, remove the circuit board from the front panel and screen. This should leave the digitizer and circuit board intact.
Afterward, remove the existing damaged glass part of the device from the front panel as shown in the last picture.
Finally add a new STJR700 screen and reverse the previous steps to reattach the device.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与4其他贡献者

Tianna Edwards

于03/22/17注册

128 声望

撰写一个指南

团队

UMass Dartmouth, Team S3-G4, Botvin Spring 2017 UMass Dartmouth, Team S3-G4, Botvin Spring 2017 的会员

UMASSD-BOTVIN-S17S3G4

4 名成员

创作了5篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 5

总计 1,130